Lift question

[2012Lamarie]

4th gen Question I put a 6" rough country and I have 35's on -44 Posey 20's on. Looking for guys with this exact set up to opine. What is the height you guys have on the truck? I know they dont lift them 6" but it just doesnt look like other trucks. Its shorter. Also looking to put 37's on now and I really dont think they will fit. But everyone says you can. I just get a feeling the shop did a 4" lidt but parts on it are only for the 6.

Sent from my SM-G965U using Tapatalk

 

[JB1]

From that pic it looks like a 6" kit w/35 height

 

[2012Lamarie]

From that pic it looks like a 6" kit w/35 height

Thanks. Maybe everyone else has 8" lol.

Sent from my SM-G965U using Tapatalk

 

[rwhjr]

Tire height and you front strut height setting make all the difference.

EX:

truck 1 has a 6” lift with the struts set at factory height and 35” tires

truck 2 has a 6” lift with the struts set at 2.1 and 37” tires

truck 2s gonna look a lot higher. Those 2 changes have a big impact

 

[JB1]

Here’s mine with BDS 6” and 325/60R20. My fender height is 43-3/4” front and 44-1/2” rear








Maybe compare your CV angle to this RC 4”
https://www.ramforum.com/threads/rc-4-suspension-question-not-issue.153499/

 

[2012Lamarie]

Here’s mine with BDS 6” and 325/60R20. My fender height is 43-3/4” front and 44-1/2” rear

View attachment 189745

View attachment 189751

View attachment 189752


Maybe compare your CV angle to this RC 4”
https://www.ramforum.com/threads/rc-4-suspension-question-not-issue.153499/

Thanks. I will measure mine to see where I am and look at that arc 4". Yours looks like mine though. Tha is man. Nice looking tuck.

Sent from my SM-G965U using Tapatalk

 

[2012Lamarie]

Here’s mine with BDS 6” and 325/60R20. My fender height is 43-3/4” front and 44-1/2” rear

View attachment 189745

View attachment 189751

View attachment 189752


Maybe compare your CV angle to this RC 4”
https://www.ramforum.com/threads/rc-4-suspension-question-not-issue.153499/

Def, higher than the 4".

Sent from my SM-G965U using Tapatalk

 

[JB1]

As far as fitting 37’s, there are a few here on -44’s with just a 6” kit but I think they had to trim

https://www.ramforum.com/threads/rzrman-ram-build-thread.90982/

 

[2012Lamarie]

As far as fitting 37’s, there are a few here on -44’s with just a 6” kit but I think they had to trim

https://www.ramforum.com/threads/rzrman-ram-build-thread.90982/

Thanks yeah I know I will need to trim the front bumper a little but it's the front inner fender wall closest to the cab I am worried about.

Sent from my SM-G965U using Tapatalk

 

[Lyle Longboat]

You can throw a spacer on too.

 

[crazykid1994]

That’s definitely more than a 4”. Here’s a 3” with 35s front fender from ground is 39.5 and rear is 40.5

 

[MarshRam]

I have a 6" with 35's/-44 offset and no trimming. I get a fender liner rub at full lock, but you are only doing like 1 mile an hour in that position, so no big deal. With 37's, I am thinking you may not need to trim the fender, but am wondering if you may need to slightly trim the corner edge of the lower plastic valance (air dam) with MT's, at least when they are new with full tread.

 

[2012Lamarie]

You can throw a spacer on too.

Thanks but no spacer. I had 2" spacers before I got the rims. That's why I got the rims for the stance. Just replaced upper control arms and tie rods because of the spacers. In my opinion.

Sent from my SM-G965U using Tapatalk

 

[JB1]

Thanks but no spacer. I had 2" spacers before I got the rims. That's why I got the rims for the stance. Just replaced upper control arms and tie rods because of the spacers. In my opinion.

Sent from my SM-G965U using Tapatalk

what gear ratio do you have?

 

[2012Lamarie]

what gear ratio do you have?

3.55 I believe. Not worried about that. I can change shift points if needed.

Sent from my SM-G965U using Tapatalk

 

[JohnnyMac]

Not a great pic, but that's a 4"/2" lift with 35's. 0 offset. You are definitely taller.

 

[AT129]

your truck is sick! Do u have adjustable shocks? I have a 6 inch Rc lift kit with 37s rubs at full turn. Don’t have adjustable shocks think u can help me find the right part for mine? Bilstein

Here’s mine with BDS 6” and 325/60R20. My fender height is 43-3/4” front and 44-1/2” rear

View attachment 189745

View attachment 189751

View attachment 189752


Maybe compare your CV angle to this RC 4”
https://www.ramforum.com/threads/rc-4-suspension-question-not-issue.153499/

 

[Barry Phillips]

4th gen Question I put a 6" rough country and I have 35's on -44 Posey 20's on. Looking for guys with this exact set up to opine. What is the height you guys have on the truck? I know they dont lift them 6" but it just doesnt look like other trucks. Its shorter. Also looking to put 37's on now and I really dont think they will fit. But everyone says you can. I just get a feeling the shop did a 4" lidt but parts on it are only for the 6.

Sent from my SM-G965U using Tapatalk

I have a 2015 Ram 1500 with a 3 inch suspension lift with 35s on it. The back sits about 1 inch higher then the front. I want to level the front to the back. What is the best way to do this without moving up in suspension lift kits!?

 

[crazykid1994]

The rear is stock? Crazy that a 3” kit and the rear is still higher

 

[olyelr]

I have a 2015 Ram 1500 with a 3 inch suspension lift with 35s on it. The back sits about 1 inch higher then the front. I want to level the front to the back. What is the best way to do this without moving up in suspension lift kits!?

how was the rear lift achieved? If its a spacer, you could exchange it with a shorter one. Or if it was new springs, you could swap the springs out for slightly shorter ones.