Lift the rear 1-2" and level the front to that

[sausec17]

Nothing else would be needed. The spindles will come with extended brake lines and the rear spacer is a simple install with nothing else needed.

I know CST can confirm they will fit on a 2014, Im not sure Maxtrac has done any testing on a 2014 but if they work on a 2013 I wouldn't see why they wouldn't on a 2014.

 

[basegroup]

Right. Well I think I made up my mind to go with the Spindles for the front. (4.5")

But now I'm trying to figure out the lift for the rear. I'm thinking spacers for now, but need to decide 1.5 or 2.0.

I'm thinking I'll go with this setup for a little while, and then slap on a 3" body lift.

 

[sausec17]

I say 1.75"

2" starts to affect ride quality

 

[basegroup]

Is it level with the 1.75? Now what do you think if I did the spindles on the front with 2 inch spacers, what would I need in the rear to be level?


Sent from my iPhone using Tapatalk

 

[sausec17]

You would need about 4-4.5" in the rear, might as well buy the full kit

Maxtrac Dodge RAM V8 2WD 1500 7" 4 5" Lift Kit 2009 w Shocks | eBay

 

[basegroup]

Sweet. I just messaged them to confirm this would fit. Somewhere in the description it says that this kit was for the non hemi.




Sent from my iPhone using Tapatalk

 

[aIIan]

Who makes 4.5" spindles?

 

[sausec17]

Maxtrac Suspension