Location of strips for Ambient Footwell Lighting

[joeygster]

If anyone has the Mopar Ambient Lighting Kit or aftermarket LED strip version in their 4th Generation Ram, could they post pics showing where they mounted the LED light strips for both the front footwells & rear ones?

Thanks

Joe

 

[MaizeNBlue]

Will get ya pics when I get home from work tonight
On the passanger side, I put them, just the seat side of the bend in the fabric, but out of eye view. The strips won't stay stuck to the fabric, so I just made a 4 small holes with my handy dandy pocket knife, and added 2 zip ties to hold them in place.

The drivers side was a little more tricky. ..and I'd have to actually look to say for certain... but I do remember they are kinda dangling ... attached to a couple of zip ties

 

[J3FF3RSON]

Will get ya pics when I get home from work tonight
On the passanger side, I put them, just the seat side of the bend in the fabric, but out of eye view. The strips won't stay stuck to the fabric, so I just made a 4 small holes with my handy dandy pocket knife, and added 2 zip ties to hold them in place.

The drivers side was a little more tricky. ..and I'd have to actually look to say for certain... but I do remember they are kinda dangling ... attached to a couple of zip ties

Those look awesome! Did you make those yourself, or did you pick those up from somewhere?

 

[MaizeNBlue]

Was a kit from Diode Dynamics. ... I just did the front wells, didn't do anything in the back seat area

 

[MaizeNBlue]

Honestly you don't need the kit.... the kit includes stuff to wire them into the fuse box, ground, etc.... I just tapped into the oem footwell light wires ...so all ya really need is just the light strip, in the color or your choosing of course

 

[MaizeNBlue]

Can't see to much from the pics...like I said the passanger side I attached just after the little bump out in the top carpeting (top pic)

The drivers side, looks like I used 3 zip ties...and attached them to pretty much anything I could. ..they don't sit level by any means ...but looking at the light on the floor, ya can't tell...least I can't

 

[joeygster]

Thanks for the pics man. Looks awesome.