hangac1093
Member
- Joined
- Oct 17, 2014
- Posts
- 84
- Reaction score
- 83
- Ram Year
- 2015
- Engine
- Hemi 5.7
I did some digging and found one post with measurements but looking or some more if y'all have them. I have a 2020 1500, I got it in 2019 and there weren't many lift options then, so i went with the ready lift 3.5" lift on 0 offset fuel wheels wrapped with 35-12.5 Nitto Trail grapplers. There was some rubbing had to tuck the fender liner, take off the small plastic black thing and trim a tiny piece of fender tab that held it in place. Im ready to go bigger but don't want too much fender gap but also maybe looking to space the wheels out an inch for a more stout stance and have a dead level front and back. I'm not going to do this until next spring, but getting ready. Im leaning towards the zone 6" , also looking at the 4" because I did a 4" super lift in my 2015 ram and was able to get around 5.25" lift out of it with 5100 Bil's up front, which was perfect. But as we all do, I always had that "I wish I went with the 6" lift" in the back of my mind. So looking for some fender measurements so i can lift it up with a jack and get an idea, y'alls opinions more than welcome too. Thanks
Last edited: