Lowered 4th Gen

[theylovenoodles]

Alright Guys So After Hours Of Work And A Busted Finger I Was Able To Install My 2 Inch Lowering Springs For The Front, Any Recommendations As To What I Should Install To Accommodate This Or Am I Good. Please Leave Your Ideas, I Wanna Get As Low As Possible

 

[theylovenoodles]

Im Also Ordering Belltech Lowered Shocks To Accommodate My Lowering Springs, is This A Good Idea?

 

[Bigskyroadglide]

It's a waste of funds, the stock front shocks will work til they need replacement

 

[G-Ride990]

I ran a set of belltechs on my Dakota R/t on a 4/6 drop and they SUCKED! Ended up with Qa1s very shortly after.

If all goes right in the next few months I will be joining the RCSB crowd here and slamming it with a possible C notch so I am interested too. (Haven't seen how low you can go without frame mods so not sure if they need a c-notch for what I want)

 

[Bigskyroadglide]

Check out the inez kit, up to 7 inches drop without a c notch

 

[Tray Burge]

It's a waste of funds, the stock front shocks will work til they need replacement

Mine didn't.
I have a 3rd gen and when I lowered it I had to upgrade my front shocks to keep it from bottoming out in the front on severe dips.
All's good now.