Missing cup holder light???

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jormaco

Junior Member
Joined
Dec 20, 2018
Posts
3
Reaction score
1
Location
Washington
Ram Year
2011
Engine
6.7
Hello. I have a 2011 2500 ST with what looks like something missing on the lower dash. Does anyone know what used to be there? I have the manual shift 4x4 with floor console. Looks like it might have been a led light??

606534C3-05BA-4A6D-A553-BF2A2EBBF5D2.jpeg

FE18C34C-7B1D-429E-BE21-40F5E1C1B4EF.jpeg

D813670C-FDE5-450B-9E63-ED9DC7E84E67.jpeg
 

rango10

Senior Member
Joined
Feb 10, 2016
Posts
244
Reaction score
66
Ram Year
2015
Engine
5.7 Hemi
Did you buy your trick used? It was most likely a brake controller that the previous owner had installed and took it out once the person sold the truck.

Sent from my BBB100-1 using Tapatalk
 
OP
OP
J

Jormaco

Junior Member
Joined
Dec 20, 2018
Posts
3
Reaction score
1
Location
Washington
Ram Year
2011
Engine
6.7
Yes it was used. There was an aftermarket brake controller mounted there that I removed and installed the factory unit where it belongs. The knock out is factory as if something is missing.
 

rango10

Senior Member
Joined
Feb 10, 2016
Posts
244
Reaction score
66
Ram Year
2015
Engine
5.7 Hemi
Ahh my apologies. I thought you were referring to the two small screw holes in your photo.

That square factor cut out does look factory and I would guess it's for a light. Take the dash off and see if there is a wiring harness close to that spot.

Sent from my BBB100-1 using Tapatalk
 
Top