Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Technically, yes. Will it be a lot of work, hell yes! Will have to mark where the old hole is in the floor, and make brackets 2” longer, drill and tap new holes.Is it possible to move the jumpseat and console forward about 2 or so inches?
Sent from my SM-N950U using Tapatalk
Or,it is bolted to both passenger and driver seat seat,so you could just drill new holes in both seat rails and thru bolt an don't bother bolting to floor.
Or,it is bolted to both passenger and driver seat seat,so you could just drill new holes in both seat rails and thru bolt an don't bother bolting to floor.