Need shock help

[MikeG]

I'm doing a 2/4 drop with cut front spring and using belltech 4" rear springs.
My question is what shock measurements do I need for the rear? Looking for extended and collapsed measurement

 

[Thmupr]

Subscribed.., about to drop mine, looking for good riding shock suggestions..

 

[PassivAggressor]

http://www.ramforum.com/f39/qa1_sho...4g_ram_-_parts_needed_install_tips_etc-54845/

This may not get you all your info that you need, but its a damn good place to start.

 

[DavidRam]

On the QA1s I went with the following following:

Front is 14.4" Extended, and 9.4" Collapsed

Rear is 21" Extended, 13.5" Collapsed

 

[MikeG]

David I'm think about trimming down to a 3/5
Do you think those will still work ?
Do you still have your stock control arm and Panhard ?if so do you want to get rid of them ?