JohnMcD348
Junior Member
- Joined
- Jan 3, 2015
- Posts
- 4
- Reaction score
- 1
- Ram Year
- 2008
- Engine
- 5.7
OK, I just noticed this morning that my heat really doesn't work anymore. I had my system replaced about 3 or 4 years ago, after my A/C went out, so I now have the "newer" updated system behind the dash with the improved doors.
When I adjust the vent settings, they all move appropriately to the proper vents.
When I turn off the A/C, the air blows at ambient temps, maybe 5*-10* hotter, but nothing like the Heat
Engine runs fine, temp stays between 190-210*.
I checked my engine bay heater hoses and both sides feel hot.
Can it be possible that the heater core is blocked and hot water is just "stuck" in both lines? I would think one side would be cooler than the other is the core were clogged.
What else should I be looking at?
Thanks
John
When I adjust the vent settings, they all move appropriately to the proper vents.
When I turn off the A/C, the air blows at ambient temps, maybe 5*-10* hotter, but nothing like the Heat
Engine runs fine, temp stays between 190-210*.
I checked my engine bay heater hoses and both sides feel hot.
Can it be possible that the heater core is blocked and hot water is just "stuck" in both lines? I would think one side would be cooler than the other is the core were clogged.
What else should I be looking at?
Thanks
John