Blackdodge2010
Senior Member
- Joined
- Sep 15, 2018
- Posts
- 202
- Reaction score
- 202
- Location
- Alberta Canada
- Ram Year
- 2010
- Engine
- 5.7 Hemi
Hey guys, I have a 2010 Ram 1500 sport. Its got a 5.7 and is automatic with a NP246 D transfer case. Lately I have been noticing a snapping noise when I push up and down on the back of the truck. After looking into it further it seems like the noise is coming from my transfer case. When I grab the yoke at the rear output shaft and push up and down on it I can hear a snapping noise. It seems to be coming from the center of the transfer case close to where the halves bolt together. There is a little bit of play in the rear output shaft but not very much. My u-joints are good, mounts are good. I have a video of it but I'm not sure how to post it here.
Otherwise it works pretty good, no leaks, no noises or issues with any ranges. I have a long trip hauling a camper coming up and want to get this sorted out before I go. Anyone ever have something like this happen to them? Or maybe someone that's rebuilt one of these and could give me an idea of what to look for if I try to fix it myself? Thanks in advance.
Otherwise it works pretty good, no leaks, no noises or issues with any ranges. I have a long trip hauling a camper coming up and want to get this sorted out before I go. Anyone ever have something like this happen to them? Or maybe someone that's rebuilt one of these and could give me an idea of what to look for if I try to fix it myself? Thanks in advance.