bluesfan68
Junior Member
hey everyone, i had a 5 channel alpine amp with a AC LC6i , Focal 10'' sub installed at the local Audio shop. Was working fine then it all went to crap. All of a sudden the sub barely plays and the front door speakers and dash speakers sound as if they are barely working. they bypassed the amp. although its still hooked up ( dont know if that makes a diff. ) also the balance is reversed. if you go to the left side the right side plays and visa versa. im pretty pissed off but i also dont want to go in there and blast them . So, what is the correct way this should be wired ? The door speakers and dash speakers have all been replaced from the factory junk as well. looks like they tapped into the wires for the speakers at the amp. but i would like to maybe have an idea how to do this myself. Since i bought all the parts myself, with there advice but only payed them for labor. HELP PLEASE!!!!! Thanks
Just to answer you guys questions. I haven't touched anything as far as after install of the amp, sub and LOC. But searching in the forums has led me all over the place. Most are doing complete rebuilds with after market HU. or just subs. Crazy that I cant find anything regarding having full range in both sets of doors. Thanks for any input guys.