Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
Make sure you're using the correct procedure depending on if your opener is a rolling code (99% of newer openers) or not. Which one are you having problems with programming???
I programmed mine to my parents garage door and had to hit the button on the back of the garage door opener. My girlfriends parents was a breeze and worked with the normal procedure
Mine programmed easily enough. Button on the opener, button in the truck. I think I might have had to use the remote to get the truck to learn the signal. No secret sauce needed. It only works about half the time though.
I had to unplug my garage door opener, then plug it back in, thean follow the procedures in the book. Be sure to keep it unplugged for a couple minutes. I fought with mine for nearly an hour one day. It wouldn't program. Then I read others having the same issue and the problem was solved by the unplug. Good luck.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.