mjscharlotte
Senior Member
- Joined
- Jul 28, 2020
- Posts
- 124
- Reaction score
- 50
- Location
- Charlotte, North Carolina
- Ram Year
- 2017
- Engine
- 5.7 Hemi V8
Hey guys,
I am in the process of switching my factory interior LED bulbs to aftermarket ones. I got the front map lights done and thought I was getting ready to do the rear dome light. Apparently, there are 2 different bulbs for it. I ordered these from Amazon but when I removed the light there’s no where for these to go - it’s just a small LED panel. Do I need to get another LED panel like Boostedram did and install that way or is there another way of doing
Alla Lighting CANBUS 211-2 578 LED Bulbs Super Bright 41mm 42mm Festoon 3030 SMD 212-2 569 6413 LED Lights Bulb for Interior Map, Dome, Trunk, Step Courtesy, License Plate Lights, 6000K Xenon White https://www.amazon.com/dp/B014P0HTKE/ref=cm_sw_r_cp_api_fabc_N8tVFb6HM791B
I am in the process of switching my factory interior LED bulbs to aftermarket ones. I got the front map lights done and thought I was getting ready to do the rear dome light. Apparently, there are 2 different bulbs for it. I ordered these from Amazon but when I removed the light there’s no where for these to go - it’s just a small LED panel. Do I need to get another LED panel like Boostedram did and install that way or is there another way of doing
Alla Lighting CANBUS 211-2 578 LED Bulbs Super Bright 41mm 42mm Festoon 3030 SMD 212-2 569 6413 LED Lights Bulb for Interior Map, Dome, Trunk, Step Courtesy, License Plate Lights, 6000K Xenon White https://www.amazon.com/dp/B014P0HTKE/ref=cm_sw_r_cp_api_fabc_N8tVFb6HM791B
