THRobinson
Senior Member
- Joined
- Apr 19, 2018
- Posts
- 167
- Reaction score
- 11
- Location
- Zurich, ON (Canada)
- Ram Year
- 2003
- Engine
- Hemi 5.7l
Have a few random start/electrical issues with the truck and trying to sort them out. Took the battery out today and decided to figure out the "mystery wires".
At the "-" terminal, there is a cable with 2 wires coming out. 1 wire attached at the terminal and one has a spade terminal, coiled wire and has never been attached to anything since I got the truck (used). The cable goes through the firewall. I looked inside and seems it's part of the remote starter that has never worked because remote smashed.
I would like to remove it, but all I can find is the quick install guide and I'm not sure how to reverse it.
I had hoped it was a simple deal like, unplug from either side, remove module, and plug the two ends together but.. not looking that way.
Also not looking like a simple cut both red wires and solder together either, because for example, in the diagram I see 3 purple wires.
Doesn't work, possibly source of random start issues... any advice? The device looks sloppily installed above the brake pedal.
At the "-" terminal, there is a cable with 2 wires coming out. 1 wire attached at the terminal and one has a spade terminal, coiled wire and has never been attached to anything since I got the truck (used). The cable goes through the firewall. I looked inside and seems it's part of the remote starter that has never worked because remote smashed.
I would like to remove it, but all I can find is the quick install guide and I'm not sure how to reverse it.
Wiring Schematic - ProStart CT-3371 Quick Installation Manual [Page 6]
View and Download ProStart CT-3371 quick installation manual online. CT-3371 remote starter pdf manual download.
www.manualslib.com
I had hoped it was a simple deal like, unplug from either side, remove module, and plug the two ends together but.. not looking that way.
Also not looking like a simple cut both red wires and solder together either, because for example, in the diagram I see 3 purple wires.
Doesn't work, possibly source of random start issues... any advice? The device looks sloppily installed above the brake pedal.