Remove headlights not grill!

[big daddys house]

All credit and Thanks goes out to our very own Corneileous on this form. I just put it on video for those of us who are visual learners like myself.

 

[O.R.T.]

You all assume we can actually find a 10mm in our toolboxes.

 

[big daddys house]

You all assume we can actually find a 10mm in our toolboxes.

Lol [emoji23]

Sent from my LG-LS995 using Tapatalk

 

[Badger 13]

Thanks for the video, great information. Never could understand why a headlight change was made so difficult..

 

[predat-r]

Lol.......what type of sorcery is this! Haha great vid.

Sent from my SM-N920P using Tapatalk

 

[O.R.T.]

The hardest part doing it this way is similar to the rears, getting the pop clips to actually let it pop loose and then not dropping the light and damaging it or something else.

I found 2 layers of green painter's tape on the fender and on the edge of the light and using a panel popper tool works best.

 

[bruce219]

Lol class.

 

[big daddys house]

FYI, this is the original video Corneileous was talking about.

 

[OC455]

The hardest part doing it this way is similar to the rears, getting the pop clips to actually let it pop loose and then not dropping the light and damaging it or something else.

I found 2 layers of green painter's tape on the fender and on the edge of the light and using a panel popper tool works best.

I held one hand on the front of the light and then reached through flip up door in the fender and pushed on the back of the headlight bucket to get it to release from the ball stud.

 

[Hawkman]

Freakin awesome!!! I may go ahead and install the RetroShop bulbs I have had for my projectors for months now. Just didn’t feel like dismantling the entire from end just to change bulbs.

Thank you.

 

[22hemi13]

Am I the weird one. I find it soooo much faster and all around easier to just pop out the 4 10mm bolts and be done with it lol.

 

[McBroom]

Am I the weird one. I find it soooo much faster and all around easier to just pop out the 4 10mm bolts and be done with it lol.

That’s the way I do it 4 bolts 2 small pops and remove the headlights done.
What I don’t like is the 2 outside bolts. I think it’s chicken **** the way those are done. So easy to strip out.

I love my truck!
Blue Mule 18 Ram 4x4 C/C
Tradesman Power Wagon