Removing trim

[jay c]

Fellas, I'm in the process of wrapping some interior pieces in carbon fiber. I've hit a snag tho, I can't find a way to remove the two trim pieces on each side of the radio. I'd appreciate any instructions on how to take those two off. Thanks in advance. (I've attached pictures of what I've done so far and the two pieces I can't remove)

Sent from my EVO using Tapatalk

 

[0212353]

the vent parts? they are molded to the dash panel.....

 

[jay c]

Yeah the tan ones in the picture with the radio....... That sucks now I have to find something else to wrap lol.

Sent from my EVO using Tapatalk

 

[jay c]

Oh I know what your talking about now, I actually want to remove the entire tan piece, not just the piece around the vent.

Sent from my EVO using Tapatalk

 

[JohnnyDollar]

Yes, the tan parts are molded to the part around the radio.
The whole center section comes off as one piece.

I am pretty sure people have wrapped them, I know they have plasti-dipped them.

 

[quietpeen]

you can get those sections hydrodipped with a carbon fiber look if its too difficult to wrap

 

[jay c]

Got it guys, thanks. So any info on how to remove that entire piece

Sent from my EVO using Tapatalk

 

[jay c]

Never mind guys I found it, thanks any way.

Sent from my EVO using Tapatalk

 

[hunter99]

2 Screws under the rubber pad in the tray at the top. Pull around the sides and it will pop off. I used to open the cup holder and start down there. There are 4 large friction clips that hold it on. Takes about a minute at most including getting the tool for the screws.

I thought I remember screws on the backside holding the tan part to the black center section.

 

[JohnD72]

Got it guys, thanks. So any info on how to remove that entire piece

Sent from my EVO using Tapatalk

http://www.ramforum.com/f75/diy_radio_removal_integrate_after_market_amp-11201/

There you go.

 

[JohnnyDollar]

Nevermind, you already solved this.

 

[jay c]

Got it done, thanks for the help!

Sent from my EVO using Tapatalk

 

[JohnnyDollar]

Looks good!

 

[jay c]

Looks good!

Thanks man

Sent from my EVO using Tapatalk