Suspension lift

[Kjmal2113]

I have a 2017 1500 with a 4” lift with 35’s on 20x12.5. I’m having a very hard time finding a shop to do a 8” lift. I’m realizing that a 6” lift is very common but it doesn’t make sense to spend the money for just 2” more. Any advice? I’ve read a 6” lift plus a 3” body lift. Is that a thing?

 

[Quick_Shifter]

I have a 2017 1500 with a 4” lift with 35’s on 20x12.5. I’m having a very hard time finding a shop to do a 8” lift. I’m realizing that a 6” lift is very common but it doesn’t make sense to spend the money for just 2” more. Any advice? I’ve read a 6” lift plus a 3” body lift. Is that a thing?

View attachment 217049

What brand lift do you currently have? And give us some front end suspension pictures

 

[co-pilot]

I don't have any answers for you ....but love how your truck looks rite now!!

 

[Kjmal2113]

It’s says a 69-1040 ready lift and xd820 grenade 20x10 -24 offset

 

[RedSRT4Me]

I have a 2017 1500 with a 4” lift with 35’s on 20x12.5. I’m having a very hard time finding a shop to do a 8” lift. I’m realizing that a 6” lift is very common but it doesn’t make sense to spend the money for just 2” more. Any advice? I’ve read a 6” lift plus a 3” body lift. Is that a thing?

View attachment 217049

This is the only company I've seen offer over 10" of suspension lift. I realize the link is for the all new 2019 but I believe they make it for the 13-18 1500 also.

https://www.bulletproofsuspension.net/dodge-ram-1500-10-12-inch-lift-kit-2019-up/

 

[Hawaii_Built]

Would a Zone or BDS 6" with Bilsteins @2.8 work (leaving out the pre-load spacer that comes with the lift kit)? It would probably get you close to 8" of lift.

 

[Freed127]

Your best bet would be a 6" loft with bilsteins on top. It should get you around 8".

 

[RedSRT4Me]

Your best bet would be a 6" loft with bilsteins on top. It should get you around 8".

View attachment 217080

I really like that offroad front bumper. Do you have more pics of different angles?

 

[Freed127]

I really like that offroad front bumper. Do you have more pics of different angles?

 

[Barry Phillips]

Badass!! Awesome looking rig!

 

[Quick_Shifter]

I went eibach set at 3.5 then the zone top hat spacer that came with the 6” lift. It was high. Math says 8.5” inches. But that is about the Highest you can go with out custom fabrication. I had to add an inch and a half spacer to my 5” rear coil springs. I was taller than guys with 6” lifts and 3” body lifts. Speaking from experience you don’t want to be anywhere near 8”. I Lowered mine back down as did @JB1

 

[RedSRT4Me]

View attachment 217103

Nice!! Is that color matched? Sorry hard to tell on my screen

 

[Freed127]

Nice!! Is that color matched? Sorry hard to tell on my screen

The bumper itself is black powdercoated. But the inserts i had colored matched. Its hard to tell in pictures sometimes.

 

[RedSRT4Me]

The bumper itself is black powdercoated. But the inserts i had colored matched. Its hard to tell in pictures sometimes.

View attachment 217422

Right on thank you for sharing!