WulfGang
Senior Member
Hi all
I'm sure a post like this has been posted here but I feel I should have my own.
There are several reasons for this IMO
I'm kinda self centered like that & I'd like this to mainly serve as a record of progress of where I am and where I'm going.
I'd like to first put out what I have with the truck then ask a couple of questions at the end.
I got the build sheet for it yesterday so I'm going off what it says:
2006
RAM 1500
5.7L HEMI Multiple Displacement Engine
DGQ 5 spd Auto 5-45RFE tranny
SLT Quad Cab 4x4
Build Date: 05/15/2006
Tires: P75/60/R20 (Good Year. Still same brand/size on it)
Customer Preferred Package 26G
" " 2TG
3XV: Big Horn Regional Package Discount
3YN: Sound & Security group discount
4KZ: 4x4 Tracking
594: Vehicle Order tracking
5L4: 4WD 4x4
blah blah blah stuff
AHC: Trailer tow group
BAZ: 136 amp Alternator
DH5: Elec shift on the fly p/time t/time trans case
DHA: Lock up torque converter
DJM: 205MM HD Front Axle
DMH: 3.92 Axle Ratio
DRB: Corporate 9.25 LD Rear Axle
DSA: Anti-Spin Diff rear axle
MXB: Front Air Dam
MXC: Front air close out panel
NFU: 34 gal tank
NHD: HD tranny oil cooler
NMC: HD Engine Cooling
NZD: Next Gen Engine Controller
SBA: Front HD Shocks
SGB: Rear HD Shocks
WP2: 20x9 Alum Chrome Clad wheels
XFH: Class IV Hitch/Rec
XFK: 7 pin wiring harness
XFU: Trailer Tow w/4 pin Connector wiring
Z6G: GVWR 6700#
ahhhh finally, the end haha
SO, I'm here in the Performance section because I'm buying a tow camper in the next couple of weeks (or less) and I'm wondering IF I need to upgrade the "performance" area of the truck. ie, custom tuning apparatus, CAI, etc?
Or, will the truck pull an app. 5K# camper w/out doing any performance mods?
I DO want to do some mods anyways but can't right now unless it would be specifically to be able to pull the camper.
Well, I'm heading over to the tow/haul forum now to post roughly the same thread but focusing more on the suspension area.
Thanx for reading. Please let me know any tips, suggestions, questions.
I'm sure a post like this has been posted here but I feel I should have my own.
There are several reasons for this IMO

I'm kinda self centered like that & I'd like this to mainly serve as a record of progress of where I am and where I'm going.
I'd like to first put out what I have with the truck then ask a couple of questions at the end.
I got the build sheet for it yesterday so I'm going off what it says:
2006
RAM 1500
5.7L HEMI Multiple Displacement Engine
DGQ 5 spd Auto 5-45RFE tranny
SLT Quad Cab 4x4
Build Date: 05/15/2006
Tires: P75/60/R20 (Good Year. Still same brand/size on it)
Customer Preferred Package 26G
" " 2TG
3XV: Big Horn Regional Package Discount
3YN: Sound & Security group discount
4KZ: 4x4 Tracking
594: Vehicle Order tracking
5L4: 4WD 4x4
blah blah blah stuff
AHC: Trailer tow group
BAZ: 136 amp Alternator
DH5: Elec shift on the fly p/time t/time trans case
DHA: Lock up torque converter
DJM: 205MM HD Front Axle
DMH: 3.92 Axle Ratio
DRB: Corporate 9.25 LD Rear Axle
DSA: Anti-Spin Diff rear axle
MXB: Front Air Dam
MXC: Front air close out panel
NFU: 34 gal tank
NHD: HD tranny oil cooler
NMC: HD Engine Cooling
NZD: Next Gen Engine Controller
SBA: Front HD Shocks
SGB: Rear HD Shocks
WP2: 20x9 Alum Chrome Clad wheels
XFH: Class IV Hitch/Rec
XFK: 7 pin wiring harness
XFU: Trailer Tow w/4 pin Connector wiring
Z6G: GVWR 6700#
ahhhh finally, the end haha
SO, I'm here in the Performance section because I'm buying a tow camper in the next couple of weeks (or less) and I'm wondering IF I need to upgrade the "performance" area of the truck. ie, custom tuning apparatus, CAI, etc?
Or, will the truck pull an app. 5K# camper w/out doing any performance mods?
I DO want to do some mods anyways but can't right now unless it would be specifically to be able to pull the camper.
Well, I'm heading over to the tow/haul forum now to post roughly the same thread but focusing more on the suspension area.
Thanx for reading. Please let me know any tips, suggestions, questions.
