The Lower Class Club....

[OklaHemi]

what are you doing a 2/4?

 

[shadow11]

No a full drop right now is going to be too expensive so I'm getting 2" drop shackles for the back and i'll remove the over load leaf too.

 

[EJM05]

I will be joining in the near future if I can find a damn kit for a 4x4. not just drop shackles... full 2/4 drop.

 

[0212353]

I will be joining in the near future if I can find a damn kit for a 4x4. not just drop shackles... full 2/4 drop.

they answered you on DT..........thats one pricey kit man.

 

[EJM05]

they answered you on DT..........thats one pricey kit man.

thats for a reg cab and quad cab. not crew...

 

[Trupiano]

Hell yeah! Lower that ****! How much are they saying the drop kit is?

 

[0212353]

thats for a reg cab and quad cab. not crew...

I'd call 'em........never know man.

 

[EJM05]

Yea Ill give them a call next week.

 

[OklaHemi]

yes everone should drop their trucks. caleb just do the shackles and keep you eyes open for a set of spindles. i have seen them go nib on cl for 250 a set. flip kits are cheap too its the spindles.... oh **** you have the srt spindles right, never mind. looks like you will need lower control arms or springs

 

[shadow11]

yes everone should drop their trucks. caleb just do the shackles and keep you eyes open for a set of spindles. i have seen them go nib on cl for 250 a set. flip kits are cheap too its the spindles.... oh **** you have the srt spindles right, never mind. looks like you will need lower control arms or springs

Yep its going to cost a lot to lower the front cause of the SRT spindles. I'll see how low it goes with the shackles and over load leaf removed and that may be good.

 

[OklaHemi]

just find some drop springs, they shouldnt be too much. i think a 2/4 drop with springs and a flip kit is like 350 shipped

 

[shadow11]

Hmm i'll have to check into that. I'll post some pics when I get the shackles on and see what yall think.

 

[OklaHemi]

its going to be badass

 

[shadow11]

I know I can't wait! Also if anybody needs some air bags let me know cause i'll have to take them off for the drop.

 

[OklaHemi]

why trup is lowered with helper bags

 

[shadow11]

Trups bags are different from mine and are made for lowered trucks. Mine sit on top of the axle so they won't compress at all. Here is a pic of them

 

[OklaHemi]

im sure those will go no problem

 

[Trupiano]

I don't know about 4 inches though... those bags only look about 8 -10 inches tall, maybe a foot. I don't think they'll compress very well with a 4 inch drop... Not 100 % sure though. They might work, but I doubt it.

 

[shadow11]

They wont compress at all. Even with 5psi in them they are rock hard so ill just sell them and get some like you got Trup.

 

[Trupiano]

I bought these on DT, for $225 I believe. They're not hard to install but they require drilling into the frame... 2 holes on each frame rail. Alot easier with the bed removed lol They're tough as nails though, hold up to 90 psi, and are rated at like 2000 lbs per bag!