tranny troubles

[gmanp135]

Recently my 2000 dodge 2500 poured ****** fluid from front of bell housing i replaced front seal and no leaks for maybe 10 minutes then same thing could a bad flex plate be the cause
Only leaks w cycle through the gears not in pk then stops in park i am, talking a gush of fluid ****** was supposedly just rebuilt had no problems first 100-200 miles then went to plow snow and fluid everywhere HELP PLEASE

 

[Okiespaniel]

Bent flex plate should give you a vibration, although it could be the problem.

Manual says...

10. Converter Housing Area Leaks.
10. Check for leaks at seal caused by worn
seal or burr on converter hub (cutting seal),
worn bushing, missing oil return, oil in front
pump housing or hole plugged. Check for
leaks past O-ring seal on pump or past
pump-to-case bolts; pump housing porous,
oil coming out vent due to overfill or leak
past front band shaft access plug.

11. Pump Seal Leaks/Worn/
Damaged.
11. Replace seal.

12. Torque Converter Weld
Leak/Cracked Hub.
12. Replace converter.