RoadkillSD
Junior Member
Hey, All. I have a 2001 1500 Laramie 4x4 auto and want to add a skid plate under the transfer case like the off-road package had. I already have the Spohn Extreme Duty skid plate but I failed to realize that I'm missing that second, flat crossmember behind the transfer case support brace/crossmember. I guess that only exists if you had the off-road package with the skid plate on 1500s. I found that second crossmember someone pulled from a 2500 but it doesn't come with any hardware.
From what I have found in images online so far is that there should be four bolts and a little bar that goes between the two bolts on each side up in the frame to hold them in place because the holes in the frame are wide, oval holes that bolts are just loose in so it needs the little bar to anchor it. Does anyone know the part number for that or know the size of that and the bolts to get something similar at hardware store/online?
For reference, this is what I'm looking for:
From what I have found in images online so far is that there should be four bolts and a little bar that goes between the two bolts on each side up in the frame to hold them in place because the holes in the frame are wide, oval holes that bolts are just loose in so it needs the little bar to anchor it. Does anyone know the part number for that or know the size of that and the bolts to get something similar at hardware store/online?
For reference, this is what I'm looking for:
