Trim panel above parking brake release

[Ktstull]

Does anyone know where you can get another one of the panels above the parking brake release? The one to the left of the steering wheel below the light ***. I have a part number but when I search for it nothing comes up anywhere.

1WA33TRMAA is the part number.



Sent from my iPhone using Tapatalk

 

[R.L.K.]

I'll be right back !

 

[R.L.K.]

Here's a link , @ the link find ( Allmoparparts.com )
P.M. Benny , if anyone can get it for you Benny can ...

https://r.tapatalk.com/shareLink?ur...&share_tid=80931&share_fid=17770&share_type=t

Black interior pieces on 2016 rams

Or just go to :
www.allmoparparts.com

 

[07MegaCabRam]

I have one in my tool box!

I need to swap mine out as I installed switches there, but it's bad location!

I got mine from Ebay if I remember correctly.

 

[Ktstull]

I have one in my tool box!

I need to swap mine out as I installed switches there, but it's bad location!

I got mine from Ebay if I remember correctly.

Bad location? What do you mean by that??
You're making me nervous because that was my plan, to install a switch or two there!


Sent from my iPhone using Tapatalk

 

[SitKneelBend]

The manual release for the 8 speed is behind that panel. Very shallow mounting depth for s switch.

Sent from my HTC One M9 using Tapatalk

 

[07MegaCabRam]

Bad location? What do you mean by that??
You're making me nervous because that was my plan, to install a switch or two there!


Sent from my iPhone using Tapatalk

Yup. I hit it with my knee sometimes getting in (amp steps) and I can't see the switches from the seat. They are angled down toward the floor.. Mine are rocker switches and 1. can't read if it's the front or rear, can't remember if it's the left or ride side for front.. haha and 2. if the light is on, I can't see the light (switch light) in daylight. Have had them on during the day when I accidental hit one.

 

[Ktstull]

Yup. I hit it with my knee sometimes getting in (amp steps) and I can't see the switches from the seat. They are angled down toward the floor.. Mine are rocker switches and 1. can't read if it's the front or rear, can't remember if it's the left or ride side for front.. haha and 2. if the light is on, I can't see the light (switch light) in daylight. Have had them on during the day when I accidental hit one.

See and that's why I want to get a spare panel, just in case I don't like the placement.


Sent from my iPhone using Tapatalk

 

[07MegaCabRam]

I'd send you my old one, but I messed it up.

I did two round switches at first and then changed to rockers. So the holes are all messed up.

 

[maple]

I did it this but my swtiches did not fit cuz the Manuel release for the 8 speed trans was in the way. Ended up getting a new piece for the dealer. DO NOT MOUNT SWITCHES IN THAT PANNEL IF YOU HAVE AN 8speed trans

 

[Ktstull]

The manual release for the 8 speed is behind that panel. Very shallow mounting depth for s switch.

Sent from my HTC One M9 using Tapatalk

Luckily I've got the 6 speed so I should have plenty of room correct?


Sent from my iPhone using Tapatalk

 

[SitKneelBend]

Luckily I've got the 6 speed so I should have plenty of room correct?


Sent from my iPhone using Tapatalk

Yep

Sent from my HTC One M9 using Tapatalk