What are these connectors for??

[Sandevino]

I’m looking into adding factory fog lights to my 2020 2500 Tradesman and started looking under the dash at the BCM. In doing so, I found these two connectors and can’t find any info about what they’re used for.

The top connector is gray with what looks like four wires - pink and red.

The bottom connector is white with what looks like two wires / connectors of unknown color.

Before I go tearing up the interwebs looking for schematics, I’d like to see if anyone knows what they are for.

Thank you in advance!

 

[bm02tj]

The four wire is probably for brake controller no idea for two wire on

 

[Jimmy07]

I’m looking into adding factory fog lights to my 2020 2500 Tradesman and started looking under the dash at the BCM. In doing so, I found these two connectors and can’t find any info about what they’re used for.

The top connector is gray with what looks like four wires - pink and red.

The bottom connector is white with what looks like two wires / connectors of unknown color.

Before I go tearing up the interwebs looking for schematics, I’d like to see if anyone knows what they are for.

Thank you in advance!

View attachment 215704

Those are the upfitter pto 1 and 2 connector ports.

 

[Sandevino]

Those are the upfitter pto 1 and 2 connector ports.

Thank you!

I found this schematic reference which I'll be digging into this weekend.

https://www.ramtrucks.com/BodyBuild...jGgHzAHGUTU0WB3rWuqSY7YmQ2vEhuBWBKkNfnCFWSmU