What did you do with your 4th Gen this week?

[RAM DRVR]

Added some fogs on this Amazon special mount. Function over form on this install. View attachment 188481

Sent from my SM-N920V using Tapatalk

I've been thinking of doing the same. Any reason not to??

 

[hodge-xj]

I've been thinking of doing the same. Any reason not to??

I've got no complaints, especially for the price. It's aluminum so it's not very strong, but it does it's job. Tiniest bit of vibration in the lights but only at idle and only I would notice. Took some finagling to get the lights aimed proper since they are a bit lower than the heads but I drove around with them on and nobody flashed me so I call it good. For a $19.49 mount I'm happy.

I posted a couple more pics in my build.

Sent from my SM-N920V using Tapatalk

 

[McBroom]

Saturday morning I bought 26-80# bags of concrete and fixed 3 sinkholes in my driveway.
No pics of the load but a few of the finished projects the 1st pic is 22 bags 2nd is 10 bags the last one is 2 bags.
I had 4 bags already that had gotten wet awhile back and put them in the 1st hole. A total of 30 bags.

Blue Mule

 

[gbark80]

Ever hit our cars and coffee? I havent in a while... I'm in Evans!

I was really looking forward to going cuz they were meeting at house of hook in Aiken and wanted to get some baseline numbers before I start doing performance mods. Gonna have to get out there at another test and tune.

 

[JimsRamTruck2012]

Haven't been doing much driving since I was . But feeling better now and back to those famous posts you all know and love.

 

[tones2SS]

Haven't been doing much driving since I was . But feeling better now and back to those famous posts you all know and love.

Glad you're feeling better bud!!

 

[hodge-xj]

Ran to store. Disgusted and got out. Lol I’m not in the mood to clean it lololol.

View attachment 188449

View attachment 188450

Evidence of a good time I'd say!! No joke, pull the floor liners, start the truck and turn the vents on full blast and take the leaf blower to that interior, or shop air. With all the doors open. You brought 1/2 the trail home lol

Sent from my P00I using Tapatalk

 

[22hemi13]

Evidence of a good time I'd say!! No joke, pull the floor liners, start the truck and turn the vents on full blast and take the leaf blower to that interior, or shop air. With all the doors open. You brought 1/2 the trail home lol

Sent from my P00I using Tapatalk

I did hose her off today. Tomorrow I rip stuff out and clean inside. Just in time for a trail ride Saturday

 

[hodge-xj]

I did hose her off today. Tomorrow I rip stuff out and clean inside. Just in time for a trail ride Saturday

View attachment 188602

Cleans up nice! Man I miss my 2500! Love the rocker dent!

Sent from my SM-N920V using Tapatalk

 

[22hemi13]

Cleans up nice! Man I miss my 2500! Love the rocker dent!

Sent from my SM-N920V using Tapatalk

Lol. Thanks passenger side is worse haha. Rock
Slider after the new year. It’s on the short list before I can’t open or close doors. But the dent damn sure add some character

 

[hodge-xj]

Lol. Thanks passenger side is worse haha. Rock
Slider after the new year. It’s on the short list before I can’t open or close doors. But the dent damn sure add some character

It'll open, just pound it flat [emoji16] how long are those slides? 8 mounts per side. 125inches? My lord

Sent from my SM-N920V using Tapatalk

 

[22hemi13]

It'll open, just pound it flat [emoji16] how long are those slides? 8 mounts per side. 125inches? My lord

Sent from my SM-N920V using Tapatalk

Dunno. I’ll be going with White Knuckle sliders since they bolt up and I’ve seen em in action. Is it a slider or a ski

 

[hodge-xj]

Dunno. I’ll be going with White Knuckle sliders since they bolt up and I’ve seen em in action. Is it a slider or a ski

For you, it's just an extension of your IDGAF

Sent from my SM-N920V using Tapatalk

 

[Ken226]

This week, well, actually yesterday, i decided that my key FOB was too big.

It sticks out of the key socket just far enough that occasionally my knee bumps into it. I didnt didn't want to accidentally shut off my engine going down the highway.

Also, any time the wife drives the truck she leaves the seat in a forward position. When i absentmindedly try to get in before adjusting it back, i nearly break the key FOB off in the socket.

I saw these in another post:
KeylessOption Replacement Keyless... https://www.amazon.com/dp/B00KTIVLHO?ref=ppx_pop_mob_ap_share

And decided to buy them, cut off the key blade, sand it flush, then program them to my truck with AlphaOBD.

It worked like a champ.

It only sticks out of the socket about an inch. It dont take up much space on the key ring, and is less likely to get hit by my knee.

 

[ram1500rsm]

I did hose her off today. Tomorrow I rip stuff out and clean inside. Just in time for a trail ride Saturday

View attachment 188602

Silver is the best color, hose and a little soap and she’s ready to be the newly wed ride at night after being the trail toy in the morning

 

[hodge-xj]

This week, well, actually yesterday, i decided that my key FOB was too big.

It sticks out of the key socket just far enough that occasionally my knee bumps into it. I didnt didn't want to accidentally shut off my engine going down the highway.

Also, any time the wife drives the truck she leaves the seat in a forward position. When i absentmindedly try to get in before adjusting it back, i nearly break the key FOB off in the socket.

I saw these in another post:
KeylessOption Replacement Keyless... https://www.amazon.com/dp/B00KTIVLHO?ref=ppx_pop_mob_ap_share

And decided to buy them, cut off the key blade, sand it flush, then program them to my truck with AlphaOBD.

It worked like a champ.

It only sticks out of the socket about an inch. It dont take up much space on the key ring, and is less likely to get hit by my knee.

This is awesome, and is my only single gripe about this entire truck.

Think the dealer could program them for me, I don't have alpha obd. I'm only 5-10 on a good day and have more than once kneed the fob.

Sent from my SM-N920V using Tapatalk

 

[hodge-xj]

Silver is the best color, hose and a little soap and she’s ready to be the newly wed ride at night after being the trail toy in the morning

Only thing better is white, doesn't even need waxed to hide my pinstripes!

Sent from my SM-N920V using Tapatalk

 

[Ken226]

This is awesome, and is my only single gripe about this entire truck.

Think the dealer could program them for me, I don't have alpha obd. I'm only 5-10 on a good day and have more than once kneed the fob.

Sent from my SM-N920V using Tapatalk

Yes, without a doubt they can do it. For about a hundred bucks.

 

[hodge-xj]

Yes, without a doubt they can do it. For about a hundred bucks.

I need to grab some than! I have to bring it in for recall stuffs soon anyway

Sent from my P00I using Tapatalk

 

[KC Cryptkeeper]

This week, well, actually yesterday, i decided that my key FOB was too big.

It sticks out of the key socket just far enough that occasionally my knee bumps into it. I didnt didn't want to accidentally shut off my engine going down the highway.

Also, any time the wife drives the truck she leaves the seat in a forward position. When i absentmindedly try to get in before adjusting it back, i nearly break the key FOB off in the socket.

I saw these in another post:
KeylessOption Replacement Keyless... https://www.amazon.com/dp/B00KTIVLHO?ref=ppx_pop_mob_ap_share

And decided to buy them, cut off the key blade, sand it flush, then program them to my truck with AlphaOBD.

It worked like a champ.

It only sticks out of the socket about an inch. It dont take up much space on the key ring, and is less likely to get hit by my knee.

So are you using the old key for lock/unlock and remote start?