wheel and tire question

[PowerWagon2012]

I'm about to pull the trigger on some 20" BMF SOTA's with 35" Federal Couragia MT's. do you think I will run into any rubbing issues on my truck. Stock suspension on my powerwagon with the 2.5" Zone Leveling kit.

thanks in advance,
Jason

 

[quietpeen]

as for diameter of the tire...no you should not have issues with at. Now width and backspacing of the wheels are the important part in this case. I don't know enough about HD's and power wagons stock wheel specs to help you further. Hopefully somebody does.

 

[PowerWagon2012]

as for diameter of the tire...no you should not have issues with at. Now width and backspacing of the wheels are the important part in this case. I don't know enough about HD's and power wagons stock wheel specs to help you further. Hopefully somebody does.

truthfully, I don't know much about lifted truck wheels/tires. I have always driven performance cars. I know I don't want an offset that cause them to stick out. I want them flush with the fenders. When I get home I will get all the info on the set up I am looking at as far as offset, exact tire size, etc.

 

[PowerWagon2012]

20x9 wheels with 35x12.5x20 federal couragia mt's

 

[iSlacker816]

Captain Mcgillycutty is running 35x20's with a 2.5 level and I don't think he's had any issues, might want to PM him for conformation!

 

[PowerWagon2012]

Captain Mcgillycutty is running 35x20's with a 2.5 level and I don't think he's had any issues, might want to PM him for conformation!

thanks bro