Will 4 gauge work

[VegasDragger45]

I'm going to be running 2 amps one 500.1 and the other is a 60.4. This will be mounted under the back seat of my buddy's RAM CC 2015. He has a Stinger 4 gauge kit the 6000 series. The amps specs are below. My question is will the 4 gauge be enough? It's true 4 gauge OFC and will go into a distro block then 2 4 gauge runs to the amps.

60.4
Ratings
2 Ohms @ 12.8v stereo 80w rms l 160w max x 4ch
4 Ohms @ 12.8v stereo 60w rms l 120w max x 4ch
4 Ohms @ 12.8v bridged 160w rms l 320w max x 2ch

500.1
Ratings
1 Ohm @ 12.8v 500w rms l 1000w max
2 Ohms @ 12.8v 250w rms l 500w max
4 Ohms @ 12.8v 125w rms l 250w max

 

[VegasDragger45]

Also it will be pushing a single 10" in a ported box. I sold him my ported 10 box.

Sub Specs
Technical Specs
Ratings 450w rms | 900w max
Coil Size 2.5″
Xmax 12.5mm

 

[Etroze86]

Yes a true OFC 4 gauge wire should be able to handle that without an issue.

 

[VegasDragger45]

Yes a true OFC 4 gauge wire should be able to handle that without an issue.

Perfect thank you, And I didn't forget about getting the amps from you. Just waiting on some extra $$$$.

 

[Etroze86]

Noworries