Will not start p0340

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Xcchoirboy

Junior Member
Joined
Jun 18, 2013
Posts
1
Reaction score
0
Ram Year
2003
Engine
3.7L V6
Since my Ram went over 100k miles 4 months ago I have had a lot of different problems. In that time i have replaced the battery, fuel pump, both o2 sensors, canshaft sensor, crankshaft sensor, throttle position sensor, idle control valve, spark plugs, and other hoses that were cracked.

Truck was running well after tps and icv replacement most recently until the battery died. I replaced the battery and since then the truck will randomly "stall" while driving at a constant speed. Also the truck would not start, again seemingly randomly. After waiting 2 minutes the truck would start.

Yesterday, the truck didnt start after waiting. I pulled code and got p0340, but both cam and crank sensors were changed about 5 months ago. There is gas in the fuel rail and i can hear the fuel pump spin up.

Any help would be appreciated
 
Back
Top