- Joined
- Aug 5, 2016
- Posts
- 326
- Reaction score
- 162
- Ram Year
- 2018
- Engine
- I-6
the other day, i installed my new tow mirrors, window controllers and driver door multi switch. after the install the driver door switch will not AUTO up... pass side window will AUTO up like normally. I can feel the indent on the driver window switch, but it will not AUTO up. I took my truck to dealer for the door lock problem months ago. When depressing the button it would not always lock doors, sometimes had to hit the button a few times. I know there is a calibration for door lock of multi switch. The dealer performed a "calibration" of the switch, and did NOT replace it. is there any calibration needed for this new switch, or is the switch FOI?
