Wire light bar help

[Coop427]

I’ve got everything mounted, and ran the inline fuse and neg wires to the relay. I have 2 wires from the relay to the light bar. And I have 3 wires from the relay to the Toggle Switch in the dash (Blue, White & Black). But the Toggle switch is illuminated all the time, I just want it to be lit when the Toggle Switch iis on instead of all the time?

 

[FF1115]

Switch the blue and white on the switch assuming black is your ground.


Sent from my iPhone using Tapatalk

 

[Coop427]

I switched the blue with each wire and it didn’t help. The switch stayed illuminated.

 

[Coop427]

Never mind but for those who want to know, the #6 pin on the relay is where you can run a wire to dash lights to illuminate the switch at night. The jumper gives it power all the time so I removed the jumper to #6.

 

[FF1115]

My bad. I thought it was a standard lighted rocker.


Sent from my iPhone using Tapatalk

 

[Coop427]

 

[FF1115]

Looks great!


Sent from my iPhone using Tapatalk