97-2500-5.9LGAS
Junior Member
- Joined
- Jun 25, 2014
- Posts
- 1
- Reaction score
- 0
- Ram Year
- 1997
- Engine
- 5.9L
So I was changing the cap and rotor on my pickup when I accidently cross threaded one of the screws on the cap. I went to back it out before it got too far, and what do you know. It sheared off. I assume the only way to fix it is to pull the distributor and drill it out, but what does that entail? Do I basically have to drop the motor, or is there an easier way?