Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sweet Looks awesome. I can't wait till May doing a Zone 4/2 for my 30th B-day.
Is there any chance you are already leveled with Bilsteins? Was just going to say, if you are.... you should do the 4/3 lift kit. Better ride in the rear end, and you can level it out with the Bilsteins up front. That is what I did. Didn't cost that much more since I already had the Bilsteins on the front.
Yeah I am leveled with Bils and have thought about doing 4/3 due to getting the rear springs over spacer....BUT I like a smaller wheel/fender gap. Plus looking at 17" rims with 0 to -6 offset which may look weird goin to tall. Still haven't made up my mind 100% yet.
I wish I would of been on this site sooner I have a 4 inch rough country lift and then purchased the bilstein 5100s went back to the shop that did my lift to have the bilsteins installed to level the front and they said it would make me nose high so they left it on the very first setting sucks. When I told them I still have a rake they came out and measured from the top of each fender to the center of each wheel and it was only a 1/4 inch but that isn't how I measured I would get on a level surface and measure from the top of the fender to the ground so I don't know if this lift is different than a zone
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I'm not sure all I know is I got the 4inch lift why does this lift come with different spacers for the rear
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Very nice!! Did you go with the 4/3 lift with Bilsteins?
Sent from my iPhone using Tapatalk
I wish I would of been on this site sooner I have a 4 inch rough country lift and then purchased the bilstein 5100s went back to the shop that did my lift to have the bilsteins installed to level the front and they said it would make me nose high so they left it on the very first setting sucks. When I told them I still have a rake they came out and measured from the top of each fender to the center of each wheel and it was only a 1/4 inch but that isn't how I measured I would get on a level surface and measure from the top of the fender to the ground so I don't know if this lift is different than a zone
Sent from my SAMSUNG-SGH-I337 using Tapatalk
No standard 4" BDS lift kit and 35x 12.5 Toyo RT
And thanks
Sent from my iPhone using Tapatalk
Ok, so 2" spacer in the rear and no Bils up front? Are you pretty level? BDS is a great kit. That's what I have. Love it.
Sent from my iPhone using Tapatalk