Zone Lift with Rancho Quicklifts

[robbob]

I am thinking about going with a Zone lift. I already have the Rancho Quicklifts to level the truck. I notice a few people running the bilsteins set on 2.1 with the zone lifts to level the truck out. Would it be ok to use the Ranchos with the lift instead of the Bilsteins?

Thanks

 

[brandonjansen]

You can run them but obviously they'll provide more front end lift than Bilsteins would. Depending on your trucks measurements this could end up putting you nose high so you may want to get a small coil spacer for the back of the truck to keep it sitting the way you want.

 

[robbob]

You can run them but obviously they'll provide more front end lift than Bilsteins would. Depending on your trucks measurements this could end up putting you nose high so you may want to get a small coil spacer for the back of the truck to keep it sitting the way you want.

That is what I wanted to hear. I am thinking a 6in kit, 2.25 Rancho's in the front, 5in coils with a 1in spacer. Should give me about 8 inches in the front and 6 in the rear.