Zone Offroad 2" Adventure Series UCA Lift

[jcatencio]

Looking to level my new '14 Ram 1500 and later on adding the Zone 4" suspension lift. Been doing a lot of research and digging around through all the threads.... I'm curious to know if anyone has ran this set up and had any issues lately. It seems to me that this would be the ideal way to go to avoid ball joint issues and still get the desired level. I've read of some guys running this set up earlier in the year and having some issues due to a design flaw with the product. Just want to get some input before committing to this set up.

 

[mojoe]

Unless they fixed the top of the spacer (hole for the strut rod to pass through), there is still a design flaw!

I had to modify mine, and I believe I was the first (maybe the only) on here to run that kit. Call them up and verify. The control arms are great. You could always run some HBS spacers, and Zone UCAs, or just upgrade to Bils or Ranchos with UCAs.

Also, the ball joint seperation was being caused by over extension. Ranchos and Bils keep the total strut length the same as the factory unit, making the need for new UCAs a moot point.

If I level again, it will be using the Ranchos (my favorite selection).