1500ram12
Senior Member
- Joined
- Jan 23, 2012
- Posts
- 5,487
- Reaction score
- 2,427
- Ram Year
- 2005
- Engine
- 5.9L Cummins
I believe he said he has the ra4
Sent from my D6708 using Tapatalk
Sent from my D6708 using Tapatalk
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I installed the backup camera kit and I took my truck to have the XAC code flashed again, the dealer tells me it will not work because my truck originally came with the RA1 radio. I upgraded to a RA2 radio along with the steering wheel controls and overhead console with the home-link/compass.
They tell me the truck does not recognize the RA2, therefore the backup camera will not work. Has anyone dealt with this?
On another note, they said the RA4 option was available but not the RA2. I recently bought a RA4 from ebay, however I am concerned the camera still will not work if I upgrade to the RA4. Any thoughts?
I'm hoping one of you guys can help me out. I bought the OEM kit from Tascaparts.
I've run the wiring harness from the back to the front and under my dash.
The question I have is what do I plug the connector(which you insert the loose wires/pins into) they furnished into?
What do I plug the other end/connector of the 3 radio wires into?
Are these 2 supposed to plug into each other? Because if so, I have a problem as the empty spare one is rounded corners and the radio one has square corners.
Any help would be greatly appreciated, this is my last hang up to get this all working.
That and if anybody has some miraculous advice on how to remove the pins/2 wires in the rear for the tailgate, I'm all ears.