Silver 2013
Junior Member
- Joined
- May 17, 2015
- Posts
- 18
- Reaction score
- 0
- Ram Year
- 2013
- Engine
- hemi 5.7
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
i am new here. i have a 2013 ram 1500 slt. i want to install a back up camera. my tailgate is electric lock. here are some pictures of harness in tailgate and of radio.
Does anyone have the original photos from this thread? I installed the back up camera with jeepguys harness several years ago and now its time to do it again on my new truck.
I also have the original directions w/pics, linked a few posts above.Does anyone have the original photos from this thread? I installed the back up camera with jeepguys harness several years ago and now its time to do it again on my new truck.
That's odd. I've enabled it on at least two trucks with the Alfa OBD and didn't have any issues. I did both of them quite a while ago so there have been several updates for the Alfa tool since then. Obviously it shouldn't be an issue since it was a supported option.Thank you. I’ve tried to enable it and it’s giving me an error on the cust setting that my bcm doesn’t support it.
I ended up checking the fuse for the camera and must’ve blown it. Changed the small fuse and it worked. Hopefully this works for you.Having similar problem to Jay23
Vehicle info = 2013 ram 1500 tradesman
Hoping for some clarity on enabling my newly installed rear view camera (aftermarket) from Infotainment (with plug n play harness) using Alfaobd. I have enabled three settings under "car configuration change"
-rear view camera = yes
-chmsl camera = yes
-rear camera present = yes
I am still not getting any video on my ra2 display (blue screen). Do I need to enable anything else, if so, what?
Note: I am getting this code after enabling the "rear view camera" = U0264 (lost communication with camera module)
I know the code above is related to the camera, question is, is it configuration or wiering issue? As stated above, i used infotainment's plug and play harness.
I searched on here and looked over the giant Alfaobd guide thread but did not come across info that I can try.
Any help is greatly appreciated.
Sent from my SM-G950F using Tapatalk