6inch speed demon led lightbars

[zachary.vv]

So i got given a set of 6 inch lightbars from speed demon with a wiring harness. Now i need to find somewhere to mount them on my truck.
I was thinking i would put them where the factory fog lights would go? Or other option was behind the grill?
Do you guys have any ideas?

Sent from my SM-G930W8 using Tapatalk

 

[quietpeen]

Where you are thinking the factory fog lights would go is actually where the factory tow hooks would go. I've seen people mount them there

 

[zachary.vv]

Hahah yeah the tow hook area.. funny i actually just asumed it was for the fogs

Sent from my SM-G930W8 using Tapatalk

 

[zachary.vv]

I tried to find somewhere to get information on how to remove the bumper but couldnt find anything

Sent from my SM-G930W8 using Tapatalk

 

[quietpeen]

That is a great place to mount them though. I don't think you need to remove the bumper to mount them there

 

[zachary.vv]

Ok but how do i mount them any ideas?

Sent from my SM-G930W8 using Tapatalk

 

[zachary.vv]

They seem to have side mounts

Sent from my SM-G930W8 using Tapatalk

 

[zachary.vv]

No one can give a guy any insight?

Sent from my SM-G930W8 using Tapatalk

 

[Mpgrimm2]

I will hopefully be mounting a similar eBay set in the tow hook spots on kit SLT within the next week or so.

I took a look behind/undet the bumper, and the plastic blanking plates are held in with 4 10mm bolts from the back. Take those out, then slide/wiggle the blank out towards the middle. Then you will have to look for a spot to bolt down the light mounts.

Mine have a single bolt/mount point vs 2 which should make it easier for me. First I need to build a harness for them.

M² Mods - From my non Flammable S7!

 

[zachary.vv]

That sounds great. Do you know how far of the bumper it would sit attached to that upport behind there?

Sent from my SM-G930W8 using Tapatalk

 

[zachary.vv]

Im really not sure how to get this going here if anyone out there has done leds inplace of the factory front tow hooks let me know.

Sent from my SM-G930W8 using Tapatalk

 

[sticknstring]

Perfect size to mount out back and wire into your reverse lights. That's what I'd do with em.


Sent from my iPhone using Tapatalk

 

[zachary.vv]

Your saying use them both out back of thw truck for lighting the box? Or just as reverse lights?

Sent from my SM-G930W8 using Tapatalk

 

[Demon-HeMi]

Toyed with this idea...

Each has about the same output as a LED pod







flush mounted LEDs in the tow hook area

 

[zachary.vv]

That looks legit. Hmm i need to figure out how i can mount mine like that. They have these big side mounts noy ideal for this situation.

Sent from my SM-G930W8 using Tapatalk

 

[Demon-HeMi]

Guy i know did this, made his own brackets that are welded to the sub frame behind the bumper

 

[zachary.vv]

Your great help! Thanks for a pictute of how it would look. Now i just need to figure out mounting

Sent from my SM-G930W8 using Tapatalk

 

[sticknstring]

Your saying use them both out back of thw truck for lighting the box? Or just as reverse lights?

Sent from my SM-G930W8 using Tapatalk

I'd flush mount them both in the rear bumper. If you do a lot of backing up to trailers in the dark like me.


Sent from my iPhone using Tapatalk

 

[Mpgrimm2]

Toyed with this idea...

Each has about the same output as a LED pod

flush mounted LEDs in the tow hook area

I wouldn't mind seeing a link to those 6" strips in the tow hook blanks you used. Are they adjustable/aimable?

Here's how I installed mine on a 2013 1500 ...
Pt1
Got the 4"x 36" slotted 14ga plate/strap from Ace Hardware, cut it to 13.5", painted it, and mounted it using 2 clips and bolts from the tow hook blanks...


M² Mods - From my non Flammable S7!

 

[Mpgrimm2]

Part 2


M² Mods - From my non Flammable S7!