Heucobob
Senior Member
- Joined
- Jun 6, 2017
- Posts
- 100
- Reaction score
- 94
- Ram Year
- 2016
- Engine
- 5.7 hemi
I have a 6in rough country . I had to do some trimming on the pinch wield . I have no rub at all .
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
This is perfection. I need some details on how to get a bumper like this that doesn't wrap around the headlights since I have fender flares like you
A lot of people run 12 wides with 12.50 or 13.50” wide tires, it’s a stretched look.
I was looking at wheels online the other day and most of the new styles were either 20x9 or 20x12, they weren’t even offering a 20x10 in any bolt pattern, times change I guess.
What gearing do you have, is your truck sucking gas, slow pickup or is it same as factory? Thinking about going 37s everyone says makes truck lose power without stepping up gears...I stepped up from 35x12.5 toyo MTs to the 37x12.5 Toyo RTs. Same weight and still a great tire.
https://www.instagram.com/p/BS7Pm1dBzys/
Same thing I’m doing except I’m going with 22” wheels and gonna add a little lift with front struts and rear coil spacerDown there bud
6"
37x12.5R20
20x12 -44
Is that with 3.21s and if so how does it drive?
That looks sick!
Can u give me some info on the lift and rim size and did u have to do a lot of trimming?
Is that with 3.21s and if so how does it drive?
RBP 87r 20x12 -44 Wheels
Nitto Ridge Grapplers 37"x12.5"
Suspension: Suspension Lift 7"
Suspension Details: MaxTrac 7" front and 4.5" rear Lift Kit with FOX Shocks and 1.5" Rear Coil Spacer.
Suspension Brand: Maxtrac
Rubbing: No rubbing or scrubbing
Trimming: Minor metal trimming
Trimming Details: Trimmed front plastic piece under bumper. Also trimmed the pinch weld and about and inch from the bottom corner of bumper. Also heat folded plastic guards by pinch weld.
rwhjr, yes with the 3.21s right now ... it actually drives fine around town and on the highways ... I "DID" take a big hit on MPG down to 12.8 from 16.5-17.5 and yes the acceleration is down a bit too, but I will find out for sure if I will need or will want to regear after I come back to California from a road trip to Arizona from March 22th to March 28th ...
It's only $800 to regear at the same shop I had it lifted so I am almost positive I will just simply regear regardless .. but so far right now the truck runs fine with no problems ....plenty of power when those red lights turn green and if I want to pass someone up on the freeways I can do it without problem ...
Thanks for the info dam that’s the set up I want on mine but I have a rc 6 inch lift kit don’t think it will work