How To: Add Factory Keyless Enter N Go

[Lawsuit11]

Got my front and rear antenna harness together and ready to go. Now the hard part waiting on the RF hub and antennas to arrive. Lol


—2018 Ram 1500—

 

[kp4243]

I finally was able to get all my wires ran and pinned at doors. Multiple fobiks programmed and push button start functioning flawlessly.

 

[Lawsuit11]

I finally was able to get all my wires ran and pinned at doors. Multiple fobiks programmed and push button start functioning flawlessly.

So you just ran all your wires to the doors for future install of the Prox handles?


—2018 Ram 1500—

 

[Lawsuit11]

So funny thing. The antenna terminals actually clip right into the c2 connector like it’s a direct fit. Smh.


—2018 Ram 1500—

 

[appzattak]

On the C2 connector pin out that is posted, is 1-10, 11-20 looking at the side the wires go into or is it the side that plugs into the RF Hub?

Example: 1-10 (left to right top) here looking at the side the connectors plug into


Or is 1-10 (left to right top) here looking at the side that plugs into the RF Hub



Sent from my iPad using Tapatalk Pro

 

[Lawsuit11]

On the C2 connector pin out that is posted, is 1-10, 11-20 looking at the side the wires go into or is it the side that plugs into the RF Hub?

Example: 1-10 (left to right top) here looking at the side the connectors plug into


Or is 1-10 (left to right top) here looking at the side that plugs into the RF Hub



Sent from my iPad using Tapatalk Pro

If you’re looking at it from your photo it is 1-10 from right to left.

The side that plugs into the RF hub is 1-10 left to right.




—2018 Ram 1500—

 

[appzattak]

second pic....


Sent from my iPad using Tapatalk Pro

 

[appzattak]

If you’re looking at it from your photo it is 1-10 from right to left.

The side that plugs into the RF hub is 1-10 left to right.




—2018 Ram 1500—

sweet, thanks. I was about to do it wrongly.


Sent from my iPad using Tapatalk Pro

 

[Lawsuit11]

sweet, thanks. I was about to do it wrongly.


Sent from my iPad using Tapatalk Pro

Lmao. If you look at the bottom of the connector of the lock. You will see an 11 and 20



Look right by the bottom of my thumb on yours with it closed you will see

11. AMP. 20




—2018 Ram 1500—

 

[appzattak]

Lmao. If you look at the bottom of the connector of the lock. You will see an 11 and 20



Look right by the bottom of my thumb on yours with it closed you will see

11. AMP. 20




—2018 Ram 1500—

Nice!!! I looked around but guess my eyes are just geeting too bad...I can see it with a bright light...thanks again!


Sent from my iPad using Tapatalk Pro

 

[Lawsuit11]

Nice!!! I looked around but guess my eyes are just geeting too bad...I can see it with a bright light...thanks again!


Sent from my iPad using Tapatalk Pro

No problem. That’s what my harness looks like right now lol. Waiting on the RF hub and push button switch to come in the mail lol.


—2018 Ram 1500—

 

[appzattak]

No problem. That’s what my harness looks like right now lol. Waiting on the RF hub and push button switch to come in the mail lol.


—2018 Ram 1500—

Just got mine in today, but my truck is in the shop till tomorrow


Sent from my iPad using Tapatalk Pro

 

[Lawsuit11]

Just got mine in today, but my truck is in the shop till tomorrow


Sent from my iPad using Tapatalk Pro

1st world problems. Good time to build all the harness and wiring lol.


—2018 Ram 1500—

 

[Alexx]

Does anybody know exactly wat i need for just push start on my 2017

Sent from my SM-G955U using Tapatalk

 

[appzattak]

Does anybody know exactly wat i need for just push start on my 2017

Sent from my SM-G955U using Tapatalk

Everything is noted in the first post


Sent from my iPad using Tapatalk Pro

 

[appzattak]

1st world problems. Good time to build all the harness and wiring lol.


—2018 Ram 1500—

Very true!


Sent from my iPad using Tapatalk Pro

 

[Lawsuit11]

Does anybody know exactly wat i need for just push start on my 2017

Sent from my SM-G955U using Tapatalk

Harness parts:

(1) C2 rf hub connector. This is the connector that plugs into the left side of the new rf hub, and all the antenna and door handle switch wires originate here.- https://www.mouser.com/ProductDetail/TE-Connectivity-AMP/174910-2?qs=rraqY75DdlpSAFG/UhRalg==

(12) C2 connector terminals (get a few extra if this is your first time crimping these type of terminals)- https://www.mouser.com/ProductDetail/TE-Connectivity-AMP/173716-2?qs=sGAEpiMZZMs7eK6h2EBtKhU8vud/mibvrXCB0VVaLIc=

(4) antenna connectors- https://www.mouser.com/ProductDetail/TE-Connectivity/1-1438608-5/?qs=5LxyKtbdikFll6uVlodOdw==

(12) Antenna connector terminals. These are only available in multiples of 100 at mouser. They can be bought elsewhere individually, but after shipping, your right back at mouser’s 100 strip price.- https://www.mouser.com/ProductDetail/TE-Connectivity-AMP/1355717-1-Cut-Strip?qs=sGAEpiMZZMti11uKQaALGSHG5Nz2znpNr4J2uumbelA=

(2) Door handle connector- https://nexelec.com/YAZAKI-7283-6079-30/

(4) Door handle connector terminals- https://nexelec.com/YAZAKI-7116472002/
*NOTE* Right now, Nexus is the only place I can find for the door handle connectors and terminals. The connectors are only available in multiples of 10, and the terminals multiples of 50. If you don’t care about using the factory connectors, you can cut the connector off the door handle wires and use bullet connectors with heat shrink tubing, or you can use this kit from mouser: https://www.mouser.com/ProductDetai...iFFWr2%2bLevviPbowYftv/PpfoXUnin/ttSSftb4XA==

Wire- https://www.amazon.com/Valuepro-224GW-C-R-Stranded-Twisted/dp/B00B887D80/ref=mp_s_a_1_1?ie=UTF8&qid=1548046196&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=Jameco+Valuepro+Stranded+Twisted+Pair+Cable,+24+AWG,+100'+Size,+Green/White,+Ideal+for+Voice+and+Data+Applications&dpPl=1&dpID=412jUOQydOL&ref=plSrch

alfaOBD software- google play store for Android. For windows- http://alfaobd.com/download.html

OBD dongle- https://www.amazon.com/ScanTool-OBD...Y340_QL65&keywords=obdlink+mx+bluetooth&psc=1

Security gateway bypass cable (2018 only)- contact DeereGuy

Your trucks PIN for the fob programming- You get this from your dealer parts department in the form of a key code inquiry. If they give you a hard time, or if they want to charge you more than $15 for it, or you just don’t want to deal with them, there’s an app called Chrysler PIN Puller you can use that costs $15.

—2018 Ram 1500—

 

[appzattak]

well, cant seem to get the wire to click into the antenna connector, it looks like the flat side goes on top, but I cant get it to click. Does the end red CPA have to come off????




Sent from my iPad using Tapatalk Pro

 

[Lawsuit11]

well, cant seem to get the wire to click into the antenna connector, it looks like the flat side goes on top, but I cant get it to click. Does the end red CPA have to come off????




Sent from my iPad using Tapatalk Pro

Lock position.


Slide it to the left. Unlock position


Insert both wires into the black end and slide the red lock to the right so it is locked

—2018 Ram 1500—

 

[appzattak]

Lock position.


Slide it to the left. Unlock position


Insert both wires into the black end and slide the red lock to the right so it is locked

—2018 Ram 1500—

Thanks so much!! Sideways is one way I did not try.


Sent from my iPad using Tapatalk Pro