- Joined
- Nov 3, 2011
- Posts
- 8,366
- Reaction score
- 7,529
- Location
- Houston, Texas
- Ram Year
- 2017
- Engine
- Hemi 5.7
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Looks like there is three labeled leads there. Is the third required?
Looks like there is three labeled leads there. Is the third required?
The radio uses 638551-3 or similar depending on wire size.Does anyone know proper Name of the terminal that is used to connect into the radio harness? I want to make my own
thanks.
Look at Big Daddy's thread and YouTube channel. He walks you through some of the AlphaOBD configs and makes it look easy.I've toyed with this for a year and it is hard to dig thru all the crap just to get the simple answers. Biggest issue is how to get the camera signal into the radio display. Looks like a couple good replies I'll have to look into
AlfaOBD seems like more and more reasons to breakdown and buy this. How hard is it to learn and not mess up the truck?? I tried reading the HUGE thread on it but it just makes life worse. Need a readers digest version with all the stupid boiled out of it
Here's some info I posted previously...multiple cameras and Digital OTA TV if you want.If you have added a front camera to your truck, please post a link and a review.
I have searched and read many threads trying to decide on which camera to buy, it sure would be nice for a single thread just for the cameras that work and have been dependable.
You did an awesome job. Im wanting to add a front camera too. So to confirm, it must be wired correctly like you did and also be turned on through alphaodb as well? So much info about this stuff
That's where I originally had mine too until I added a bull bar.
That's where I originally had mine too until I added a bull bar.
Sent from my HTC U11 using Tapatalk
Thanks.
It wasn’t difficult at all. The camera plugs into the included harness. The harness has an rca male on one end and T’s off with black/red for power/ground. All I ran into cab was the male rca which plugs into that harness from Mpgrimm2, then made the settings and boom I got a front camera. I already had AlfaOBD so my total investment on this was approx $70.
View attachment 200060