Recent content by fearroyo
-
F
2021 1500 Front & Rear Park Assist
I decided not to add the parking sensors and started working on the 360 surround camera view.- fearroyo
- Post #5
- Forum: 5th Gen DIY
-
F
2021 1500 Front & Rear Park Assist
Awesome, will do. Thank for the recommendation.- fearroyo
- Post #3
- Forum: 5th Gen DIY
-
F
2021 1500 Front & Rear Park Assist
Found a decent write up for adding the front and rear park assist module, sensors, and wiring. However, I am having a hard time narrowing down the correct module and front & rear harness for my 2021 1500 Big Horn. Does anyone know how to narrow down the correct module and front and rear wiring...- fearroyo
- Thread
- Replies: 6
- Forum: 5th Gen DIY
-
F
5TH Gen Alfa OBD
Is that just on the 5th gen? Alfa had RF Hub access on the 4th gen.- fearroyo
- Post #87
- Forum: 5th Gen DIY
-
F
5TH Gen Alfa OBD
On my 2017, I converted to push button start and passive entry. During that process you had the ability to program the new remotes. Now my 2021 already has push button start. I will eventually add the antenna and handles for passive entry. However, I only have a single remote and would like to...- fearroyo
- Post #85
- Forum: 5th Gen DIY
-
F
How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman
Additional information I just found...My heated and cooled seats have been working as expected including the hardware and soft buttons. I recently swapped radios for a 2018 radio with Android Auto. After the swap, the only soft button available was the heated wheel button. All the hardware...- fearroyo
- Post #1,752
- Forum: 4th Gen DIY
-
F
How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM
Absolutely will.- fearroyo
- Post #1,634
- Forum: 4th Gen DIY
-
F
How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM
That was the perfect suggestion, thanks!!! Comparing my file and the 2018 file I found seat settings under the Cabin Network which I did not need before. Enabling them resolved the issue.- fearroyo
- Post #1,630
- Forum: 4th Gen DIY
-
F
How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM
Still dealing with no soft buttons on the radio for the heated/cooled seats. Disable and re-enable did not make a difference. Might need to disable for a couple of days then try again. Anyone experience this issue or have other ideas?- fearroyo
- Post #1,627
- Forum: 4th Gen DIY
-
F
New quad to projector harness
FYI...almost 9 months in and still working without issue. -
F
How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM
Battery disconnect did not help. Going to disable the codes and re-enable them to see if that helps.- fearroyo
- Post #1,623
- Forum: 4th Gen DIY
-
F
How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM
I've seen some conflicting info on this topic. But I have a 2017 Ram 1500 with factory 8.4 non-nav unit and dual ATC. I added heated steering wheel and heated/cooled seats all enabled with AlphaOBD. I have now installed an 8.4 non-nav unit from a 2018 Ram 1500. The heated steering wheel soft...- fearroyo
- Post #1,621
- Forum: 4th Gen DIY
-
F
How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM
Got a unit from a 2018 RAM. Easy swap and working as expected. Just waiting for the rest of the controls (Seat Heat/Cool) to show up.- fearroyo
- Post #1,620
- Forum: 4th Gen DIY
-
F
M² Mods Intro & Project List
Any of these available? RAM 4C (UAS/UAQ) Media Hub Adapter Harness - $40 -
F
How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM
It's going back and being refunded. Now i'm trying to research if a 4C with Nav from a 2019 Grand Cherokee would work. EDIT: NVM, just found out it is the 2-piece unit in the 2019.- fearroyo
- Post #1,609
- Forum: 4th Gen DIY
