How To: Add Factory Keyless Enter N Go

skuppy069 · Jun 7, 2020

Austen said:
Yes sir luckily it was the C5 connector on the BCM that I had unplugged hoping to get more room. When I had wrapped everything up last night I pulled on the connectors to make sure they were latched but I had unlatched the C5 connector and re-seated it. Jimmy07 saved me today by recommending that I reseat the connector after he ask if I had unplugged any other connectors. I GREATLY appreciate how helpful everyone has been on this forum!

17' CCSB 4X4 68RFE 2500 6.7 Tradesman DRP EGR delete, CTT tuning w/TCM tuning, UAQ w/7 speed HVAC, 7" premium EVIC, OEM front Parksense, OEM style front camera, aux switches, OEM remote start, Single Zone ATC

Yep it’s a great resource

Hanover Fiste · Jun 9, 2020

I finally got Keyless Go to work! After receiving a reply from the developer this morning, it turns out I had the "Interface Timeout" setting set too high. It needs to be set to 100 mS or less; mine was set to 400.

All this was done on a 2018 Sport, using the Windows version of AlfaOBD, and using RF Hub 68363199AC.

Veritas726 · Jun 9, 2020

Hanover Fiste said:
I finally got Keyless Go to work! After receiving a reply from the developer this morning, it turns out I had the "Interface Timeout" setting set too high. It needs to be set to 100 mS or less; mine was set to 400.

All this was done on a 2018 Sport, using the Windows version of AlfaOBD, and using RF Hub 68363199AC.

Man what a journey. Glad you got it up and running.

Sent from my iPhone using Tapatalk

bigdodge · Jun 12, 2020

Has anyone had the wiring for the RF hub and antennas already there? Just not in use. I just checked mine and I have the c2 plug and one for the antenna already there unused.

Sent from my Pixel 4 XL using Tapatalk

Ricks Ram · Jun 13, 2020

bigdodge said:
Has anyone had the wiring for the RF hub and antennas already there? Just not in use. I just checked mine and I have the c2 plug and one for the antenna already there unused.

Sent from my Pixel 4 XL using Tapatalk

What trim level is your truck? If it's a Laramie it may already have some or all of the factory wiring which would save a lot of time and money. We have done several of these conversions but they have all been lower trim levels and didn't have any of the factory wiring. We are getting ready to do a 15 Laramie 2500 soon and I am hoping it has some of the wiring as well.

Sent from my SM-G960U using Tapatalk

bigdodge · Jun 13, 2020

It's a 2015 power wagon. It's not fully loaded out but it appears to have the necessary wiring. Where would the front antenna be? Under the center console?

Sent from my Pixel 4 XL using Tapatalk

bigdodge · Jun 13, 2020

Here is the back plugs

Sent from my Pixel 4 XL using Tapatalk

Jimmy07 · Jun 13, 2020

bigdodge said:
Here is the back plugs

Sent from my Pixel 4 XL using Tapatalk

I would guess your body harness has the provisions for the two cab antennas and the wires going to the four door cab side connectors, but you probably still don’t have the wiring on the door sides of the door connectors. Pull the lower B pillar panel and check to see if the door antenna wires are populated on both sides of the door connector.

bigdodge · Jun 13, 2020

I'm still waiting on my RF hub and was just looking around. I'm sure you are right. I have all the necessary wiring harness parts so I'm not worries of it's not all there. Hopefully I can just get the push button start hooked up without much trouble

Sent from my Pixel 4 XL using Tapatalk

Hanover Fiste · Jun 14, 2020

Jimmy07 said:
Find keyless go, passive entry, fobik safe enable, and passive entry CSM, and enable them all.

Which of these can I disable if I'm not going to add "Keyless Enter," without affecting "Keyless Go?"

Jimmy07 · Jun 14, 2020

Hanover Fiste said:
Which of these can I disable if I'm not going to add "Keyless Enter," without affecting "Keyless Go?"

Passive entry, and passive entry CSM

Hanover Fiste · Jun 14, 2020

Thank you!

Edit: I believe those two parameters DO affect Keyless Go. I disabled both of them via AflaOBD, and the "Press Brake Push Start Button" on the cluster disappeared, replaced with "Key in Ignition."

I enabled them back, and the cluster returned to normal.

48PowerWagon · Jun 14, 2020

As I'm waiting for my parts to arrive (any1 making antenna rigs? (harnesses)) I'm prepping my rear seat area (rear seat hook mod) and cleaning I noticed my body vents (68324094AB Exhauster-Bodyside Aperture) missing flaps and broken grills so I order a couple replacements (only 10 bucks @ allparts) so besides loosing up my bed and pulling back an inch or two how do I remove and replace?

bigdodge · Jun 14, 2020

48PowerWagon said:
As I'm waiting for my parts to arrive (any1 making antenna rigs? (harnesses)) I'm prepping my rear seat area (rear seat hook mod) and cleaning I noticed my body vents (68324094AB Exhauster-Bodyside Aperture) missing flaps and broken grills so I order a couple replacements (only 10 bucks @ allparts) so besides loosing up my bed and pulling back an inch or two how do I remove and replace?

I replaced mine from inside the cab. Very tight and a little soap and water helps.

Sent from my Pixel 4 XL using Tapatalk

bigdodge · Jun 14, 2020

Jimmy07 said:
I would guess your body harness has the provisions for the two cab antennas and the wires going to the four door cab side connectors, but you probably still don’t have the wiring on the door sides of the door connectors. Pull the lower B pillar panel and check to see if the door antenna wires are populated on both sides of the door connector.

It's this what your referring to?

Sent from my Pixel 4 XL using Tapatalk

Jimmy07 · Jun 14, 2020

bigdodge said:
It's this what your referring to?

Sent from my Pixel 4 XL using Tapatalk

Yes. This is one of the antenna wires-

If you unplug that connector, is there a male pin on the other half of the connector that wire would mate to?

bigdodge · Jun 14, 2020

There is a wire going through to the door. If that's what you mean

Sent from my Pixel 4 XL using Tapatalk

bigdodge · Jun 20, 2020

So does anyone know where the factory front antenna location would be? If I have the back antenna wiring I should have the front just not having any luck locating it.

Sent from my Pixel 4 XL using Tapatalk

Jimmy07 · Jun 20, 2020

bigdodge said:
So does anyone know where the factory front antenna location would be? If I have the back antenna wiring I should have the front just not having any luck locating it.

Sent from my Pixel 4 XL using Tapatalk

Underneath the jumpseat/center console between the driver and passenger seat. It bolts to the same bracket that the ORC module is mounted to.

bigdodge · Jun 20, 2020

That's what I thought I had read in here somewhere. Just wanted to clarify. Hub should be here Monday and I'll be ready to go. Thanks for the help

Sent from my Pixel 4 XL using Tapatalk

How To: Add Factory Keyless Enter N Go

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Forum statistics

Share this page