rebuild
-
Need some guidance after a rebuild
I have a 2017 ram, rebuilt motor with an el chapo cam. Needless to say after the base tuning was finally “completed” she will start but doesn’t keep running, found out she was flooding the plugs. I am not a mechanical genius by any means, and I only assisted on the rebuild. What should I do...- Burgs
- Thread
- cam elchapo ram1500 rebuild
- Replies: 3
- Forum: General Discussions
-
M
Hard-to-find Part...Re-use TTY Bolts?
First time rebuilding an engine and here's my dilemma: the connecting rod bolt (6508811AA) for my 4.7 (2010 Ram 1500) is discontinued, and finding spare stock out in the wild is proving difficult. According to the manual, these must not be re-used as they are torque-to-yield. My full rebuild is...- mutdog
- Thread
- bolt connecting rod hardware rebuild rod torque torque to yield tta tty yield
- Replies: 7
- Forum: Engine & Performance
-
T
New Arizona-based 2013 1500 Project
What's going on everyone, I am here from good'l Phoenix Arizona! I just acquired a family members forgotten project through a trade for a running vehicle. I picked up a 2013 Ram 1500 with 260k miles that has not ran for about 2 1/2 years. This Ram has the 5.7 Hemi and the infamous tick and...- tokelat
- Thread
- 1500 5.7 hemi engine rebuild new guy new user rebuild transmission transmission rebuild truck rebuild
- Replies: 12
- Forum: General Discussions
-
D
2004 5.7 hemi rebuild questions.
Hey guys, my brother has a 2004 ram with 5.7 hemi and he accidentally ran low on oil and now he has a knock. So with that being said with it being bad enough to have engine knock will there be a lot of parts that need replaced or reusable? Where can I get a good rebuild kit for the engine and...- DnS1821
- Thread
- engine engine rebuild hemi hemi 5.7 hemi rebuild rebuild
- Replies: 0
- Forum: Engine & Performance
-
T
Random Oil Pressure Readings & Hard/Long Start (Even after a engine rebuild)
Vehicle: 2005 Dodge Ram 1500 - 5.7 liter hemi - 230k miles To keep things short, about 3 months ago, my truck experienced multiple problems in one day including, stalling, knocking, misfires, low oil pressure readings (oil pressure resets after restarting car). About a 2 weeks into working on...- TruckGuyKY
- Thread
- hard start oil pressure gauge rebuild
- Replies: 12
- Forum: Engine & Performance
-
Rebuild kits
Well it's time to rebuild my beast. It's a 2006 3500 5.9 CR with a G56 hung to it. I've got the billowing white smoke and my oil filler cap blows to the moon. I haven't pulled the motor to start building yet but I want to build it strong and never have to worry about it again. Do any of y'all...- Colby Hardin
- Thread
- 24v common rail rebuild
- Replies: 1
- Forum: 5.9 Common Rail
-
Only a RAM owner can appreciate this! Post your RAM ONLY Owner pics
I figured only ram owners might appreciate this pic! POST YOUR PICS BELOW! I also have a youtube channel now. youtube.com/c/BrosAuto -
Ram 1500 rear end rebuild
I blew up my rear end on my 2002 Ram 1500 2WD. So far I haven't got it fully apart, just removed the cover. My spider gears shattered. Need advice on what parts will interchange. Will update soon.- Daniel Schultz
- Thread
- differential interchangeable parts rebuild
- Replies: 1
- Forum: Engine & Performance
-
Aftermarket/Rebuilt CV joints
GM Mopar fam. I am new to this forum so please bear with me. I was looking into rebuilding the front end of my '04 Ram 1500 4x4. I am starting with the CV axles due to boot failure of the drivers side and I know it's smart money to change both at the same time. I was looking on RockAuto and...- Sho_Tyme671
- Thread
- 1500 ram 4x4 aftermarket cv axle front end help oem rebuild review
- Replies: 4
- Forum: Exterior
-
K
2006 5.7l w/ mds rebuild
My brother/ employee wrecked my work truck, ran it completely dry of oil, seized it, then got locked up in prison and it has been sitting for about 1.5 years. finally started tearing into it last week. I just dropped the crank off this morning to have it turned. I had another shop check out my...- Kyle Kinnamon
- Thread
- 5.7l hemi ram 1500 rebuild
- Replies: 1
- Forum: Engine & Performance
-
R
Rebuild Plan
Helllo All, I am shopping around for Gen III Hemi 5.7 donor (2006 - 2008) for an engine swap for a 2005 Jeep Wrangler. I have been reading and following threads on this forum for a year now as I prepare for the project. I have come to a question that I know folks here will have good answers...- Rollout1
- Thread
- rebuild
- Replies: 3
- Forum: Engine & Performance
-
seized engine flywheel problem
i have a 2006 ram laramie 5.7 hemi 4x4 i seized my engine and im going to rebuild the engine. something broke inside like a piston i know that because i found big broken metal pieces inside the oil pan. the engine is ready to be taken out ive disconnected everything im just missing the four...- edgaram
- Thread
- 2006 5.7 diy engine flywheel hemi laramie ram rebuild
- Replies: 3
- Forum: Engine & Performance
-
Tips on doing a restoration on a Ram 1500
Hey, Back in 2003 I bought a brand new Ram 1500 2 door slt with the Hemi engine. I kept it until 06 and then sold it with 73,000 miles. I just bought it back last weekend. The truck now has 232,000 miles on it. It was a daily driver and is still all original from what I can tell. I want...- Classiclawncare
- Thread
- hemi ram rebuild restore
- Replies: 17
- Forum: General Discussions
