0-60 times

[OklaHemi]

about 4.2 seconds here in me QC with a bit of juice.

nice. do you have some pics of your truck

 

[RandTx]

Pictures yep i guess got a few
but I'm mo fond of videos
http://www.youtube.com/v/cyhWQgD5TCs&hd=1


edit ok found the vid section and I posted it over there at

http://www.ramforum.com/f18/vids-my-runs-ennis-2258/#post47471

 

[OklaHemi]

oh thats even better. that is a fast ass truck

 

[truckin151]

Sweet!!!!!!!

 

[Off_Road_Teacher]

about 4.2 seconds here in me QC with a bit of juice.

Thats an awesome time. How big of a shot are you using?

 

[RandTx]

Thats an awesome time. How big of a shot are you using?

100 on a on a meld of zex nozzle and HSW microedge plus progressive system w/ superchips 91 tune + psc1.

and thanks for the compliments guys!
she does pretty good for over 5K lbs of flying brick

 

[RandTx]

Got to thinking and did a mo proper acceleration graph.
Based on that,
I'd (re-) estimate my best 0-60 mph time at about 4.0x seconds.
on a track,
graphed using data points based on the timeslip data and data logs

 

[truckin151]

Did a new personal best this morning, it was nice, dry, low 50's, didnt have any KR issues today and decided to open it up to see if it was gonna be there at WOT.... Ran a 5.36 0-60 (2.5 KR at 6000rpms which is about where it was, 12.5 AFR though), only down side was that my phone wasn't charged so I cant post a pic of the gauge

Oh well its at least a good starting point for comparison once the cam goes in Saturday

stupid phone

 

[0212353]

very nice!

 

[Off_Road_Teacher]

Did a new personal best this morning, it was nice, dry, low 50's, didnt have any KR issues today and decided to open it up to see if it was gonna be there at WOT.... Ran a 5.36 0-60 (2.5 KR at 6000rpms which is about where it was, 12.5 AFR though), only down side was that my phone wasn't charged so I cant post a pic of the gauge

Oh well its at least a good starting point for comparison once the cam goes in Saturday

stupid phone

That's great that you got yourself a baseline. Now you will really be able to see what you gain with the cam. Probably be well in the 4's by this time next week.

 

[Redtruck-VA]

Wow, excellent base line...

 

[Off_Road_Teacher]

That is going to be a real fast truck by the time he is done.

 

[Trupiano]

Prolly a dumb question... but when you guys do your 1/4 mile runs and all that? How do you preload the TC? Or whatever you mean? I just mash my foot to the ground from a dead stop... and I still get alot of wheelspin. Wouldn't reving to a higher rpm before you launch just make it them spin more? I need some clarification. I wanna do some more times, but I guess I don't really understand how to launch very well.

 

[Off_Road_Teacher]

I used to rev it up a little while holding the brake before launch to get my best times. But ever since the cam I get the best 0-60 and 1/8 mile times putting it in 4wd hi and just mashing it.

 

[truckin151]

Well this thread has died.... Anyone do any runs lately? I'll e doing some here pretty soon after I get some caltracs on and brakes swapped out

 

[ramthis9501]

11 seconds... no where near you guys. i need a superchip

 

[HemiBabe]

Ok here's mine I just did, I have a lot of wheel spin due to bald tires, but it's not a bad startin point I just did it one time for each time, so im sure if i heated the tires up and tried a few more times i could get the time down

 

[TheSatinPumpkin]

Good times but i don't think heating them up would help though.

 

[HemiBabe]

hmm alright i think u r right. theyre just about bald so i can get any grip in 1st gear lmao

 

[truckin151]

Yeah, your tires are spinning a bit there. Need to get a better tire on there, learn your launch and give it a go. You should be in the mid 6 sec range with the mods you have (thats where mine was at with pretty much identical mods a few years back)