12 V outlet always on

[clayusmcret]

Can confirm that it's the 20amp fuse in 54a/b. Default it's in left/middle. use the fuse puller from the engine box (or whatever you'd like) and swap it to middle/right. I cannot verify the lower plug in the cubby, but the top-of-dash plug is now ignition based and not always on. this is how it should have been from factory in my opinion. at least there's an option i guess.

I'll give it a shot. Thanks!

 

[RamMan06]

View attachment 486823

Hello! I own a 2023 Ram TRX so my fuses don’t go that high. How do I “re-fuse” or move my fuses to fix the issue? Thanks!

 

[John Jensen]

Hello! I own a 2023 Ram TRX so my fuses don’t go that high. How do I “re-fuse” or move my fuses to fix the issue? Thanks!

I'm not familiar with a 2023 TRX, nice truck. Your manual should show all your fuses' locations and what they serve.

 

[batman900]

Thank you for this info!!!! Just got a new truck and was putting my garmin dash cam in. Saved my bacon.

 

[clayusmcret]

We finally changed 54B this week and the dash outlet finally goes out with the turned off engine. Thanks for the assist!

 

[2020Ram2500]

Easy fix here> https://youtu.be/_d255EidRL8?si=wXwsygkp0GYvVtu1

 

[clayusmcret]

Easy fix here> https://youtu.be/_d255EidRL8?si=wXwsygkp0GYvVtu1

That's the simplest video of what needs to be done. Good find!

 

[Drummin4jc]

I just did this on my 2024 Ram 2500. It is a slot that allows you to move the fuse from one position to another (3 slots). It is fuse 90/91 located in the attached picture. I simply had to remove the fuse and reinstall it by moving it one “slot” over.

Thanks for this post!!

Adam