1986 d100 leveling

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Wesd100

Junior Member
Joined
Jan 2, 2018
Posts
11
Reaction score
0
Location
Texas
Ram Year
1986
Engine
3.7
On my 1986 d100 3.7 2wd, I am planning on putting the Van lower control arms in the front With the original coils and I would like the rear to match, or be level. What do I need to do to the rear end To make the truck ride level ?I am afraid if I do the axle flip it will be too low in the rear end ,And I don't know if I do a longer shackle and a Spring hanger flip if it will Lower the rear end enough to make the truck level.I would like to keep all the tires and rims the same size.
Thanks in advance.
Wes
 
OP
OP
W

Wesd100

Junior Member
Joined
Jan 2, 2018
Posts
11
Reaction score
0
Location
Texas
Ram Year
1986
Engine
3.7
has anyone used the: " SHA-DO7893 Shackle Drop/Zerks Old Ram "
from airbagit.com?

is there any modification needed like for the chevy drop shackles?
 
Top