2002 1500 Cross-member bushing, does someone make one???

[iiM MAGA]

I ordered Rpugh country 4" lift but it did not come with bushings to replace the one bad crossmember bushing I have. As anyone found a way to get bushings yet or a work around?

 

[Daw14]

I ordered Rpugh country 4" lift but it did not come with bushings to replace the one bad crossmember bushing I have. As anyone found a way to get bushings yet or a work around?

Look at the post before yours # 20 maybe he had these made ,try pming him .

 

[iiM MAGA]

No response from anyone that I've sent a DM too. Any information on where or how to work around the bushing is much appreciated

 

[GrossmeisterB]

Just stumbled across this thread.

So the rear lower control arm bushing is the same as the torsion bar crossmember bushing?! Is that what people are saying here?!

 

[C-ME]

I can't for the life of me find replacement bushings for the cross-member on my 02 Ram 1500. This is where the rear of the control arm lands and a bolt goes through it into the torsion bar.

Am I SOL on replacing this part? I have some clunking in the front end and this is one of the last factory pieces of rubber in there.

has any one figured out a replacement for this, MOP-52113134AA or a cross reference, not for the rear crossmember I found that on ebay, I cant find that cradle bushing for the lower control arms

 

[C-ME]

MOP-52113134AA or a cross reference please I'm against a wall here! Thank you!

 

[C-ME]

Just stumbled across this thread.

So the rear lower control arm bushing is the same as the torsion bar crossmember bushing?! Is that what people are saying here?!

is this the replacement for 52113134AA cradle bushing between the lower control arm fork?

 

[Sherman Bird]

I can't for the life of me find replacement bushings for the cross-member on my 02 Ram 1500. This is where the rear of the control arm lands and a bolt goes through it into the torsion bar.

Am I SOL on replacing this part? I have some clunking in the front end and this is one of the last factory pieces of rubber in there.

TRY LMC Truck?