2014 Sport Leveling Kit & 35's: Issues

[Revo]

Recently had my 35's put on my 2014 Sport (leveled), wheels are 18x9, 0 offset. 35" TOYO M/Ts @ 12.5.

Some issues I am experiencing:
- The tire on the driver's side rubs on the inner plastic wheel well molding, I've somewhat resolved this by melting back the plastic using a heat gun, almost no rubbing now. My concern is that this is ONLY occurring on ONE side, the other side hardly clears, but clears fine without any modding. I must say, the wheel well looks like total **** with the melting job I did, not like that matters very much at all...

- There is about 50% more mud on the driver's side than there is on the passenger side.

- I had an alignment done at the dealership about 2 hours ago, a bit more rubbing on the driver's side than there was before the alignment.

- I can't notice anything relating to one side sticking out more, which leads me to be even more confused!

Anyone heard of these sorts of things going on? I think I'm just paranoid, but really think I should make sure. I've ordered 1.75inch Bushwacker extend a fender flares, hopefully this will help with all the mud that sprays up on the side...

If anyone has any input to share, it will be much appreciated!

Here's an album of pics:
imgur: the simple image sharer

 

[HemiRoar]

I don't have much for ya except that I have also noticed the driver's side front wheel well is a lot dirtier than the passenger side.

Also, with 0 offset and that tire width, you might need spacers.

 

[Revo]

I don't have much for ya except that I have also noticed the driver's side front wheel well is a lot dirtier than the passenger side.

Also, with 0 offset and that tire width, you might need spacers.

Or maybe a 4 - 6 inch lift?

 

[HemiRoar]

Or maybe a 4 - 6 inch lift?

Yes sir, I'll take option B