2WD Level Kit - Which one and Where ?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

a_guerrajr

Senior Member
Joined
Jan 9, 2012
Posts
351
Reaction score
25
Location
Houston
Ram Year
2012
Engine
HEMI 5.7
Hey Guys, I tried searching the forums and internet.

I'm having trouble finding out a level kit for a 2012 2WD. Everything I see is 4WD.

Any recommendations and links. I'd appreicaite it.

Just looking for a kit that would allow some 305/55/20's up front. I'm assuming at least a 1.75" or higher ?

Thanks
 

Stangshcky12

Senior Member
Joined
Oct 26, 2011
Posts
9,046
Reaction score
942
Location
Oshkosh, WI
Ram Year
2007
Engine
5.9 Cummins
I would recommend the longer shocks or shock extenders.
You don't need to replace them though
There are also 2-3" leveling springs out there but are more expensive
 

quietpeen

Senior Member
Joined
Jul 14, 2010
Posts
25,443
Reaction score
3,913
Ram Year
2021 TRX
Engine
Hellcat
you can fit 305/55/20's without leveling the front, but you will need wheel spacers if you have the stock chrome clads with or without a level kit.
 
OP
OP
a_guerrajr

a_guerrajr

Senior Member
Joined
Jan 9, 2012
Posts
351
Reaction score
25
Location
Houston
Ram Year
2012
Engine
HEMI 5.7
you can fit 305/55/20's without leveling the front, but you will need wheel spacers if you have the stock chrome clads with or without a level kit.

Really?

Can you point me to the spacers I would need to get?

So no matter if i Level it or not, i will need the spacers.

And i can run the 305's without the level kit?


Sorry if i'm repeating what you said, i'm trying to confirm, any proof on the site?

I will be running the stock 20" clad wheels. Like in your sig
 
Last edited:

WhiteExpress

Senior Member
Joined
Sep 8, 2011
Posts
18,187
Reaction score
3,284
Location
Midland, TX
Ram Year
2004
Engine
5.7 Hemi
I've heard the 2" leveling spacers lead to a harsh ride, and wear out the ctrl arm bushings. (sucks, I wanted them as well). I've decided to hold off until I can afford the CST 4" Spindles.
 

myoung84

Senior Member
Joined
Dec 2, 2010
Posts
1,899
Reaction score
321
Location
Tulsa, OK
Ram Year
2012 Power Wagon
Engine
Hemi 5.7L
I was happy with my Fat Bob's Garage 2" spacers with factory shocks.
 

srqFF

Senior Member
Joined
Jan 21, 2012
Posts
327
Reaction score
5
Location
Sarasota FL
Ram Year
2012
Engine
Hemi 5.7L
There aren't too many options out there for our 2WDs.

I'm saving up for the CST 6inch lift instead of just a leveling kit.
The rep I spoke to recommended bilstein HD 2500 shocks for the front to compensate for the Hemi, as the kit was not intended originally for the bigger motor.
 
Back
Top