I have installed a RCX 5" lift on my 05 Ram. Ever since then, I have had nothing but issues. Steering rack failures, CV shafts, upper control arms, tires, torsion, and numerous alignments. Trying to find out if anyone that has gone up 4-5" has had any of these issues. Previous owner had the torsion bars cranked up, found that out the hard way as I was replacing steering racks like they were going outta style (my own fault for not paying attention).
5" RCX lift issues...NEED INPUT!!!!
- Thread starter cclee
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
LS5DodgeRam
Senior Member
- Joined
- Feb 17, 2013
- Posts
- 793
- Reaction score
- 115
- Location
- South Florida
- Ram Year
- 2004
- Engine
- 4.7L v8
Rcx as in rough country? Did you put larger rims and tires on after the lift? And also are the ball joints and other suspension parts factory?
Slowbro
Member
- Joined
- Jul 16, 2013
- Posts
- 41
- Reaction score
- 11
- Ram Year
- 2008
- Engine
- Hemi 5.7
Does your lift incorporate a differential drop? I've seen numerous RCX lifts on various brands of trucks and the front inner CV angles always look horrible.
Bluesmoke91
2nd GEN Site Mod
- Joined
- Nov 26, 2010
- Posts
- 3,161
- Reaction score
- 240
- Location
- Baldwin Park, California
- Ram Year
- 2007
- Engine
- Hemi 5.7
I have a 6" RCX on my 07 4x4. No issues so far other than my right inner cv boot tore and has been throwing grease ever since. That could have been from me driving 25 miles home from the shop before getting an alignment. I also have Bilstein 5100s maxed out so that could be causing my wach cv angles.
I put the same 5in RCX life on my '04 ram. I noticed with my truck the drop brackets for the front diff doesn't drop it down enough and causes the cv shafts to bind up. I was able to fix that problem by turning the torsion bars down a little bit.
Similar threads
