bellaireroad
Senior Member
Anyone know if a fifth GEN mirror will fit on a fourth GEN? Thanks
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
They’ll fit, but you’ll have to re-arrange all the wires in the two connectors because the circuits are in different positions on the 5th gen door modules.Anyone know if a fifth GEN mirror will fit on a fourth GEN? Thanks
Sent from my iPhone using Tapatalk Pro
They’ll fit, but you’ll have to re-arrange all the wires in the two connectors because the circuits are in different positions on the 5th gen door modules.
I would think so. The connector for that is showing the same as 2016-2018s. As long as no dimension on the new master switch is smaller than a pre-2019 switch, you should be able to cut the hole in the armrest as needed to get it to fit.Ahh... very good to know, thanks. I have gotten very good at repinning connectors. How about the driver side armrest control, can that be swapped as well? Sure would be nice to get the trailer towing mini mirror in the main mirror to work
Sent from my iPhone using Tapatalk Pro
What is power convex and trailer spot lamps ?Puddle lamps ?The 2019 2500/3500 mirrors are the ones that should bolt up on ours, not the 1500 5th gens. After thinking more about this, there won’t be a way to get the power convex mirrors or the trailer spot lamps to work, though (features on the tow mirrors), since AlfaOBD doesn’t have those listed to enable. Basically, the only functional feature you would be gaining is the blind spot indicators in the mirror glass.